As the name implies, support wires support the filament wire in the bulb, The filament, of course is the wire that glows white hot, giving out light
It has components that are arranged end to end in order to produce light.
To make a simple series circuit to light a bulb, the simplest components are a power source (such as a battery); a switch (to turn the power on or off); the bulb (obviously !); and some wires to connect everything together.
Input to light bulb is Electricity and output is light.
bulb , bulb holder , wires and bataries are main compoments of a circuir
Thomas Jefferson did not invent the light bulb. The light bulb was invented by Thomas Edison in 1879 in New Jersey.
As the name implies, support wires support the filament wire in the bulb, The filament, of course is the wire that glows white hot, giving out light
As the name implies, support wires support the filament wire in the bulb, The filament, of course is the wire that glows white hot, giving out light
The globe is the outer glass shell. The shaped coil inside is the filament. Wires and the stem support the filament inside the bulb. There are gases within the light bulb to prevent it from burning out. And the base is to securely support the bulb.
The parts of a light bulb are the glass envelope, mixture of inert gases at a lower pressure, and a screw cap. Inside of the light bulb is the coiled tungsten filament, support wires, glass fuse enclosure, connecting wires, and the electrical contact.
Glass is the insulator in a light bulb. The base has a heavy piece of glass to separate the ring from the center, and there is a glass support inside the bulb to hold up the filament and separate the wires going to the filament.
by shorter wires or thiker wires
Make a circuit with 2 wires a batery and a light bulb and touch wire to medle on light bulb
No. Or at least not perceptually. The wires only supply electricity to the bulb - the bulb is what limits the current.
Perhaps by unscrewing the bulb light.
u need a battery 2 wires and a light bulb. Step 1. Get the 2 wires and connect them to the battery step 2. connect the other side at the bottom of the light bulb the light bulb should light if it doesn't :(
u need a battery 2 wires and a light bulb. Step 1. Get the 2 wires and connect them to the battery step 2. connect the other side at the bottom of the light bulb the light bulb should light if it doesn't :(
The filament is made of tungten and these 'wires' (filament) conduct electricity.