base
For a BJT transistor the three basic elements are collector, base and emitter. For a FET transistor are drain, gate and source which are analogous for the BJT parts mentioned before.
The base.
Recombination of negative and positive charge carriers
The active region of a transistor is when the transistor has sufficient base current to turn the transistor on and for a larger current to flow from emitter to collector. This is the region where the transistor is on and fully operating.
Power transistor can conduct large amount of currents through it, more than small signal transistor. power transistor has a vertical structure and small signal transistor has horizontal structure.In power transistor quasi saturation region is present which is absent in the small signal transistor. In power transistor there is a inculsion of drift layer which is not there in the small signal transistor. Power dissipation is less in power transistor and it is more in small signal transistor. b.v.polytechnic,vasai pushkar vaity.
yes transistor is an active element.
Transistor is an active element because it can amplify the signal applied.
yea
A transistor is mainly composed of silicon and germanium
The storage element of EEPROM is a floating gate transistor. This transistor can trap or release electrons, which alters the conductivity of the transistor and determines whether a binary value (0 or 1) is stored in a specific memory cell.
it is a active component.
For a BJT transistor the three basic elements are collector, base and emitter. For a FET transistor are drain, gate and source which are analogous for the BJT parts mentioned before.
For a BJT transistor the three basic elements are collector, base and emitter. For a FET transistor are drain, gate and source which are analogous for the BJT parts mentioned before.
The base.
The input of a transistor is typically referred to as the "gate" in a field-effect transistor (FET) or the "base" in a bipolar junction transistor (BJT). In both cases, the input controls the flow of current through the transistor, allowing it to function as a switch or amplifier in electronic circuits. The gate or base receives the input signal that modulates the transistor's operation.
Silicon and Germanium are often seen in transistors.
There are three terminals on a transistor. Some have four, where the fourth is a screen.The normal three are Emitter, base and collector. The Emitter emits electrons, the collector collects them and the base controls the flow.