Shorting the motor's electrical supply will blow the fuse and the motor will run down and stop.
when its is short circuited there will not be any drop and hence the current will b maximum when its is short circuited there will not be any drop and hence the current will b maximum
short circuited stub
To prevent the wire from getting short circuited to ground or even to other wires.
A current transformer's secondary must never be open-circuited. If the instrument fed by a CT needs to be removed, then the secondary terminals must be short-circuited first. This is because a large, and potentially-dangerous, secondary voltage will appear across an open-circuited CT. Normally, a set of links is provided at those terminals for this purpose.
On a three wire supply system if you connect the two 110V wires together and they are across the phase they will short out and trip the breaker. If the two 110V wires are supplied from across the phase and connected to a motor then the motor will run. If the 110V wires are on the same phase nothing will happen.
Nothing happens.
Like transformer induction motor has stator winding(Primary winding) and rotor winding(Secondary winding) separated by an airgap.Rotor winding(generally Al bars) are short circuited at the end to produce torque for the rotation.Hence the name short circuited transformer.
when its is short circuited there will not be any drop and hence the current will b maximum when its is short circuited there will not be any drop and hence the current will b maximum
There no brushes in an induction motor. The rotor is independent and is a short-circuited cage of parallel bars.
Go to an ATT store, buy an iPhone, take it home and power it on. Then drop it in the toilet. There you go. iPhone that is short circuited.
P1402 DM-TL Circuit Continuity Check (Pump Motor) - short circuited, or disconnected. There is a motor inside of the DM-TL which ends up getting water inside sometimes and then rusts or short-circuits.
In DC inductor is short circuited .
short circuited stub
The short circuited path is the one which doesn't have any distributed elements(i.e., resistors, inductors,etc...). So the highly short circuited means only 'the connecting wire' is present in the circuit.
Heat, and possibly an explosion.
The main board may be short-circuited
Power Rangers Time Force - 2001 Short-Circuited 1-7 was released on: USA: 17 March 2001