What happens when the current in the coil is halved? No pins are attracted. ... A magnetic field is always created around a wire when it carries electric current.
Fewer pins are attracted
Ino pins
Current coil carries the current.
The current coil is one through which the current of source can pass. This coil is connected in series. The voltage coil is connected parallel to the applied voltage. In the current coil the quantity of current flowing is proportional to the current flowing in load while in the voltage coil, current flowing is proportional to applied supply voltage. The voltage coil current is independent of current flow in load. For a complete understanding, please refer to a watt meter diagram.
P1 = V I1, Therefore, if P2=0.5*P1, thenI2=0.5*P1/V, or 0.5*I1and if P3=2*P1, thenI3=2*P1/V, or 2*I1In other words, current is proportional to power and inversely proportional to voltage.
If the magnetic field is fluctuating, or the coil of wire and magnetic field are moving with respect to each other, then a current is induced in the coil of wire. If the two are stationary and the magnetic field is stable, then no current is induced in the coil. However, if there is a current in the coil, from another source, then the coil and the field will exhibit a relative force that will tend to move the coil with respect to the field.
You will generate electricity. As the wire cuts through the magnetic field.As the magnet is moved, there will be an induced electro-motive force (EMF) which can cause a current in the coil. Once the magnet stops moving, the current will go to zero.
The coil will produce an alternating electric current.
The coil will produce an alternating electric current.
The electrical current stops flowing.
Load halved means the power is halved.Voltage being (assumed) constant, the current is halved. P (Load in Watts)= V x I Hence P/2= V x I/2
It is halved. coz voltage=current * resistance
Yes it does. By a factor of 4.
It is halved.
It is halved.It is halved.It is halved.It is halved.
if kelvin temp is halved, the volume is halved if pressure is constant.
You generate a (stronger) magnetic field.
It is halved.
These terms apply to the coils inside a wattmeter. 'Pressure coil' is an archaic term for 'voltage coil', which is connected in parallel with the supply, while the 'current coil' is connected in series with the load.