What is meant by discrete in values with respect to flip-flops and latch is 0 and 1.
Because that is the definition of a latch. A J-K flipflop is master-slave triggered because that is the definition of a J-K flipflop. A D flipflop is edge triggered because that is the definition of a D flipflop.
flipflop is edge triggering and latch is level triggering
a group of flip-flops sensitive to pulse duration is called latch whereas a group of flip-flops sensitive to pulse transition is called a register.
Hi, divide by two counter using d latch design is just same like as Divide by two counter using d ff. ex: we have a d latch, if enable is high, what ever the input , that will capture the output. if enable is low, This condition latch will remain in same state. So, if u do like, u can achieve divided by 2 counter using d latch. i hope this will help u.
A latching circuit is a circuit with two stable states, which one can think of as 1 and 0, thereby being able to store one bit of information. In circuit diagrams, these are represented by cross-coupled NOR or NAND logic gates.
Because that is the definition of a latch. A J-K flipflop is master-slave triggered because that is the definition of a J-K flipflop. A D flipflop is edge triggered because that is the definition of a D flipflop.
flipflop is edge triggering and latch is level triggering
FF-sincron L-asincron level sensitive and edge sensitive
Generally speaking, a latch is a device that will respond to an input level (logic high or low) whereas a flip-flop will only respond to its inputs when the proper triggering edge (transition between logic levels) is applied. Be cautious as some people use the terms interchangeably.
A D latch is level triggered. It will follow the input as long as the gate is true. Once the gate goes false, the output will stay at the last known value. A D flip flop is edge triggered. The output will not change until the edge of the gate. At that point, the output will go to the state of input, and then it will stay at that value.
a latch is like a lock
The door latch may not retract properly due to a misalignment of the latch mechanism, a worn-out latch, or debris blocking the latch from retracting.
The door handle may not latch properly due to a misalignment of the latch mechanism, a worn-out latch, or a loose connection between the handle and the latch.
Rickey Latch's birth name is Rickey L. Latch.
The door latch may not close properly due to misalignment, a faulty latch mechanism, or a worn-out latch.
The door knob may not latch properly due to a misalignment of the latch mechanism, a loose screw, or a worn-out latch.
Replace the door latch.