answersLogoWhite

0

youre mpother was a hamster and your father smeltof elder berries

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Electrical Engineering

Why was before used the 300 ohm transmission line?

The impedance of a centre fed dipole at resonance is about 73 ohms. The feed impedance of a folded dipole is four times that, 292 ohms. The feedpoint is of course balanced in both cases, thus 300 ohm balanced line is an excellent match for the folded dipole active element of a commercial TV antenna.


Why is a set up transformer needed in a stereo or tv set?

A stereo or tv set needs a step-up transformer because a step-up transformer increases the voltage of an appliance and a stereo or and a tv set needs a high voltage.-------Semper Fidelis(ADC)----------


What is the ideal value of input resistance?

depends on what you are measuring practical use like electricity or batteries as low as possible to test voltage on a car battery perhaps 0.1 ohm / volt to check the final anode on a crt tv at least 1000 ohms per volt low power circuits require higher impedance wire connections low impedance the 10000 ohm per volt meters are fine as fixed monitors but usless for practical service work. they indicate voltage thru oxides and lose screws they show 120V in a socket when the lamp refuses to light


An old television draws about 3 A of current It plugs into a wall outlet that is 120 V What is the resistance in ohms of the television?

Is this, intentionally, a trick question?We are dealing with alternating current, here, not direct current. So, if you divide the supply voltage by the current drawn by the television set, you are determining its impedance(Z), not its resistance:Z = V/I = 120/3 = 40 ohmsImpedance is the vector sum of resistance and reactance. As the current is probably being drawn by a transformer, the resistance will be significantly lower than the reactance, perhaps only an ohm or two -if that!So, from the information supplied, you cannot determine the resistance.


What are connectors?

Outlook Connector is an add-on for the Outlook mail application that lets users connect their hotmail account to their Outlook program, allowing them to control their hotmail from Outlook.

Related Questions

What you need to connect two 8 ohm speakers to your HD TV?

everything


Are there any speakers on this TV, or does it need external speakers?

This Tv comes with speakers attached to it.


How do you connect speakers to sylvania TV?

If the TV has an audio output, connect this to a stereo amplifier, and then connect speakers to this. Modern TV's don't have amplifiers for external speakers.


When was Speakers' Corner - TV series - created?

Speakers' Corner - TV series - was created in 1990.


How can you get your television speakers to work on your samsung television in conjunction with the samsung ht-z320 home cinema kit?

You should not use the internal tv speakers with your home cinema speakers. This is a complete sound system and adding the tv speakers just muddies the waters.


How do you connect 2 computer speakers with a sub-woofer to a flat screen TV?

The TV will need to have AUDIO OUTPUT jacks to connect to the speakers or a amplifier to power the speakers and subwoofer.


Where can I get good new TV speakers?

If you are looking to Buying new TV speakers in Florida, I would go to Best Buy. Their prices may be more affordable than a store specializing in just TV speakers.


Did they have speakers for TV's in the olden days?

From the very first broadcasts, sound accompanied pictures in televisions so all televisions had speakers.


What is a radio AV receiver used for?

It is used to switch audio and video signals into a television set, monitor, etc. It also contains a radio receiver and a audio power amp to drive the speakers.


What cable makes it so whatever is on tv comes out on home theater speakers?

The TV needs to have AUDIO OUT connectors, some don't. If they are present on your TV connect them to the Home Theater box's INPUTS. Then go into the TV's men and switch the TV's speakers off. Don't use the TV's speakers with the Home Theaters speakers.


Are TV speakers able to be replaced?

It is possible to replace your TV speakers. However, you will probably end up with better sound quality if you disconnect the internal speakers and add an external or surround sound system.


How do I hook up Bose speakers to sharp LC60LE831U?

To connect Bose speakers to a Sharp LC-60LE831U TV, first, check if your Bose speakers are passive or active. For passive speakers, you'll need a compatible AV receiver that connects to the TV via HDMI, optical, or audio cables, and then connect the speakers to the receiver. If the Bose speakers are active, you can connect them directly to the TV using the audio output (either via a 3.5mm headphone jack or optical output) to the speakers. Ensure to configure the audio settings on the TV for the correct output.