0
What else can I help you with?
What is difference of blocked rotor and locked rotor protection of motor?
What is difference of blocked rotor and locked rotor protection of motor?Read more:What_is_difference_of_blocked_rotor_and_locked_rotor_protection_of_motor
Explain starting of a wound rotor induction motor?
explain wound rotor
What are the advantages of skewed slots in the rotor of a squirrel cage rotor?
It helps to put on a little more traction. The rotor will stay on better because it is not as slippery.
What is locked rotor?
Locked rotor current is the amount of current a motor would draw if you energize the motor and the rotor (the spinning shaft) doesn't spin.
Why rotor slots is more than stator slots in induction motor?
rotor slot more. it is to get a large rotor inductance value of inductance the stator windings
Why will the rotor of a wound-rotor motor not turn if the rotor circuit is left open with no resistance connected to it?
Because there is no current flowing in the rotor, and thus there is no magnetic field in the rotor, and thus there is no torque between the rotor and the field.
How do you measure the thickness of a rotor?
What is a rotor?
What is a helicopter blade called?
the blade is called rotor bladesThe rotor blades on top are called Main Rotor Blades, because they are the main source of lift for the helicopter. The smaller rotor blades on the tail are called Tail Rotor Blades.
What type of rotor is found in a universal motor?
Wound rotor and squirrel-cage rotor
What is the rotor head for?
The rotor head changes the angle of incidence of the rotor blades as they rotate.
Why does a typical small helicopter with a single rotor have a second small rotor on its tail?
The small rotor on the tail, called the tail rotor, counteracts the torque produced by the main rotor of the helicopter. Without the tail rotor, the helicopter would spin uncontrollably in the opposite direction of the main rotor. The tail rotor helps maintain the helicopter's balance and heading.
How do you resurface a rotor?
The rotor will have to be removed from the car. It can be resurfaced by mounting it on a special machine that slowly removes metal from the rotor until the rotor is smooth.
What is difference of blocked rotor and locked rotor protection of motor?
What is difference of blocked rotor and locked rotor protection of motor?Read more:What_is_difference_of_blocked_rotor_and_locked_rotor_protection_of_motor
Can you replace just one rotor?
Can I reuse a resurfaced brake rotor with a new rotor on a car
What happens to the rotor speed and rotor current when the mechanical load on an induction motor increases?
rotor speed will decrease....the rotor current wil increase.....
What happen to the rotor speed and rotor current when the mechanical load on an induction motor increases?
rotor speed will decrease....the rotor current wil increase.....
What is palindrome for part of a machine that turns or rotates?
The word rotor is used to refer to a rotating part of a machine. It is also a palindrome.
