answersLogoWhite

0

The primary use of a clock in flip flops is to provide the trigger pulse to the flip flop

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Difference between synchronous and asynchronous flip flops?

Synchronous flip-flops change outputs synchronously to a clock signal, while asynchronous flip-flops can change outputs regardless of the clock signal. Asynchronous flip-flops are not as commonly used due to potential timing hazards, while synchronous flip-flops are widely used in digital circuits to ensure reliable operation.


What do you do with the flip flops on Wimpy Boardwalk in poptropica?

you use the flip flops to collect the flying disc


What is a ripple counter?

A ripple counter is a counter in which state transitions of one or more flip flops are triggered by the outputs of other flip flops in the circuit. If all flip flops in the counter are triggered by a common clock pulse, then the counter is called a "synchronous counter". a ripple counter is a counter that will ripple through the information sequentialy. .


How do you say flip flops in spanish?

Most Spanish speaking people use the term "Chanclas" to refer to Flip-Flops, which simple means "sandals"


How do you get on the roof on Wimpy Wonderland island?

you have to use the flip flops


Which flip flops are used in counter?

In counters, the most commonly used flip-flops are the D flip-flop and the T (toggle) flip-flop. The D flip-flop is often used in synchronous counters where data is sampled on a clock edge, while the T flip-flop is particularly suited for binary counters because it toggles its output state with each clock pulse. Both types enable the construction of various counting sequences in digital circuits.


What footwear does Chris Brown wear in forever single?

flip flops flip flops


What are the disadvantages of JK flip flops?

JK flip-flops have a few disadvantages, including the potential for race conditions, which can occur if the inputs change too quickly relative to the clock signal, leading to unpredictable output. They also require careful timing management to avoid glitches, as both inputs can change simultaneously. Additionally, JK flip-flops can be more complex to implement and understand compared to simpler flip-flop types, such as D flip-flops, making them less ideal for basic applications.


Who made flip flops?

Modern day flip flops were made by the Japanese and became popular after World War ll. The soldiers brought the flip flops back with them. In ancient times, the Egyptians wore sandals that looked like flip flops.


How do you design a decade synchronous counter?

To design a decade synchronous counter, you start by using flip-flops, typically JK or D flip-flops, to create a 4-bit binary counter that can count from 0 to 9 (ten states). The counter increments on each clock pulse, and you implement combinational logic to reset the counter when it reaches the state representing 10 (1010 in binary). This reset logic can be achieved using AND gates to detect the 10 state and feed back to the reset inputs of the flip-flops. Finally, ensure that the clock input is connected to all flip-flops to maintain synchronization.


How can you make flip flops?

Well, you can use paper and tape. That is probably the cheapest way. You could also you use cardboard if you have the money. But, the best way to get flip flops is to probably go buy some.


Where do flip flops originate from?

Flip-Flops most definatley originate from china as that is where everthing comes from