answersLogoWhite

0

The typical diode consist of terminals. Terminal A is anode negative, Terminal B is cathode bearing positive energy. An epoxy dome secures lead frame.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

A typical value of reverse breakdown voltage in a diode is?

50V or larger


What is the typical value of the barrier potential for a germanium diode?

The typical value of the barrier potential for a germanium diode is around 0.3 to 0.4 volts. This barrier potential is the voltage required to overcome the potential barrier at the junction of the diode and allow current flow in the forward direction.


When a diode is properly forward biased what is the voltage drop across it equal to?

The forward biased voltage drop of a diode depends on the type of diode and the current through the diode. A typical silicon diode will exhibit a voltage drop between 0.6v and 1.4v depending on current. An LED might range from 2v to 3v. A germanium diode might go a low as 0.2v. Bottom line; it varies.


The typical college composition follows the guidelines of what?

MLA


What are the amount of voltage across the diode?

The amount of (forward biased) voltage across a diode is dependent on current and temperature. A typical silicon diode has a forward voltage of about 0.6V at low current and temperature. As current goes up, voltage goes up slightly, with a typical voltage being 1.4V at high current. As temperature goes up, voltage goes down slightly, but the maximum current rating also goes down.


The typical form of a swing composition?

32 tone AABA


What are the standard measures for bars in a typical music composition?

The standard measures for bars in a typical music composition are usually organized in groups of four beats each, creating a consistent rhythm throughout the piece.


What would be a typical magnitude for the reverse current in a general-purpose silicon diode?

It depends on the particular diode. They range from around a hundred volts to several thousand volts, depending on what you want to spend.


What is the chemical chemical composition of CRS bars?

CRS is the acronym for Corrsion Resistant Steel; for the chemical composition of a typical material see the link below.


What is the use of crystal detector in electronics?

A crystal detector is a diode, often used in non-powered radio receivers. It conducts at a much lower voltage than a typical silicon diode, making it easier to generate the signal amplitude required from the tuning circuit.


How is zener diode different from a conventional diode or ideal diode?

zener diode :zener diode operates under reverse bias voltageideal diode :ideal diode operates under forward bias voltage


Can a diode be used as rectifier diode?

yes, diode can be used as rectifier diode to convert ac to dc