350-400Amps
2.5 sqmm cu cable current carrying capacity is 19 amps.
what is the current capacity 3 core 16sq mm swa
AS PER THUMB RULE THE CURRENT CARRYING CAPACITY OF WIRE IS 4 TIMES OF ITS CROSSECTIONAL AREA OF WIRE i.e. 10 sq.mm wire carrying maximum current 40 amp , 16 sq.mm carrying maximum current 64 amp , now amp convert in watt by multiplying by volt i.e. 240 16 sq.mm carrying max load 64x240= 15360 watt
Current in the single core cable would induce a magnetic current in the steel cable, though a transformer effect. This would heat the steel armored strands, and the circuit would increase more electrical power from the load supply point. The earthing of the cable glands would complete the circuit and the return current would flow in the earth bonding cable between the two points. This is called Eddy currents generated in the cable by the twist of the steel armored around the central core, current flowing in one direction
As a rough estimate, for medium voltage cables directly buried in earth, I use 2 A / mm^2 for copper conductors, and 1.2 A/mm^2 for aluminum conductors. However, the installed capacity of a cable is mostly dependent on how much heat can be dissipated to its surroundings, and ultimately the maximum temperature of the insulation material. For this reason, it is important to know how the cable will be installed, what conductor is used (Al or Cu), the cable insulation (for both thickness and operating temperature limits), soil thermal resistance (if buried), and if there are other heat sources (cables, process pipes, incident solar radiation, etc) are nearby. There are several cable manufacturers that provide reference current ratings for nominal installations. Check Nexans, Prysmian, or Okonite (US dimensions).
what is the current carrying capacity of 4 core aluminum cable 300m long
according to manufacturers data sheet 325amps ,but plz tell me how to calculate current carrying capacity of a cable.
2.5 sqmm cu cable current carrying capacity is 19 amps.
what is the current capacity 3 core 16sq mm swa
You have to be specific. whether the conductor is aluminum or copper. Current carrying capacity will be different for these two types. Copper cable can take more load than aluminum cable for same diameter.
the current rating of a 70mm swa 3core cable is 1.2 amps buried or 2 amps on perforated cable tray suspended 500 feet above sea level in antartica
AS PER THUMB RULE THE CURRENT CARRYING CAPACITY OF WIRE IS 4 TIMES OF ITS CROSSECTIONAL AREA OF WIRE i.e. 10 sq.mm wire carrying maximum current 40 amp , 16 sq.mm carrying maximum current 64 amp , now amp convert in watt by multiplying by volt i.e. 240 16 sq.mm carrying max load 64x240= 15360 watt
The UK wire tables for 1.0 mm2 three-core domestic cable (live/neutral/earth) specify a limit of 10 amps.
There's no such word as "'Ampacity". The current carrying capacity of 50mm cable is around 300A continuous or 365amps @ 60% duty cycle. It's generally used for engine starter circuits or high current welders.Answer'Ampacity' is a North American term for the 'current-carrying capacity' of a cable. It is not used in most other English-speaking countries.
a magnet
a magnet
That can be a 'solenoid' or an 'electromagnet'.