answersLogoWhite

0

What else can I help you with?

Related Questions

Does a wire with a diameter of 0.01 mm have lower resistance than a wire with 0.1 mm?

No, the wire with a diameter of 0.01 mm will have higher resistance compared to a wire with a diameter of 0.1 mm. Resistance of a wire is inversely proportional to its cross-sectional area, so a thinner wire will have higher resistance.


WHAT IS THE Cable size in mm2 required for 100 amps?

Approximate overall diameter of the wire is 12.8 mm. If you are looking for metric wire size 95 mm2. 187500 circular mils.


What is 14SWG copper wire in mm?

14SWG copper wire has a diameter of 1.628 mm.


What is the gauge number of the wire with a diameter of 2.0 mm?

AWG # 12 is 2.053 mm in diameter.


A piece of wire 100 m long has a diameter of 1 mm with a resistance of 2 ohms calculate the resistance of the same wire 2 km long with the same current?

If the wire length is 100m and the Diameter is 1mm calculate the Resistance of wire?


What size wire is needed for 240v 3.5 amp system?

16 mm to 18 mm


what electrical wire size is largest?

Wire size 0000 AWG is the largest electrical wire. It is 0.46 inches in diameter or 11.86 mm in diameter. The cross sectional area is 107.16 mm(squared).


What is the difference between cord and wire?

Not sure if it's 100% true, but when I was PAT testing at work it said that a cord had a diameter of >4mm and a cable had a diameter of <4.mm


If the wire dia is 4mm then what is the gauge?

A wire with a diameter of 4mm corresponds to a wire gauge of approximately 6 AWG (American Wire Gauge). The relationship between wire diameter and gauge is not linear, so different wire diameters can correspond to the same gauge.


How thick is 26 gauge steel in mm?

For a wire classified under American Wire Gauge standards, 26 gauge wire is 0.0159" (0.40386 mm) in dameter. For a wire classified undere metric wire gauge standards, a 26 gauge wire is 2.6mm in diameter. Metric gauges are calculated simply by multiplying the diameter, in mm, by 10 and therefore increase as the diameter increases, unlike the AWG standard.


How do you measure Electrical wiring diameter in the United Kingdom?

Wire diameter is measured in millimetres (mm)


How many gauge in mm?

For wire gauge, 1.25 mm diameter wire is closest to 16 gauge (AWG). See related link.