0
What else can I help you with?
Why master slave jk flip flop is preferred over jk flip flop?
A plain JK flipflop is unreliable as it is enabled by the level of the clock, not the edge. In a master-slave flipflop, the master section captures the new state based on the inputs while the clock level is high, then the slave section captures the new state from the master while the clock level is low. This has the effect of making the flipflop act as if it was falling edge clocked but retains the simplicity of design of flipflops that are level enabled.
How master flip flop is used to overcome time race in jk flip flop explain?
In a master-slave flip-flip arrangement, the master flip-flop determines its state on one clock edge, while the slave flip-flop determines its state on the following clock edge. This way, the end-to-end output does not ever change on any one clock edge, so no race condition is possible.
How can master slave flip flop prevent race around condition?
RACE AROUND CONDITION OCCURS WHWN BOTH THE INPUT ARE HIGHAND THE OUTPUT THUS UNDERGOES A TRANSITION STATE.FOR EXAMPLE CONSIDER THE INPUT VALUES IN A JK FLIP FLOP;ie;J=K=1 ,THE OUTPUT Q0=0 IN NORMAL CASE WILL CHANGE TO 1 AND VICE VERSA. THE REMEDY FOR RACE AROUND PROBLEM CAN BE ELIMINATED BY USING A MASTER SLAVE J-K FLIP FLOP'S
What is 2-wire and 3-wire?
They refer to the number of I/O lines (not power) needed to transfer data between to processors/controllers.3 wire serial has a bidirectional data line, a clock line, and a master/slave line.2 wire generally is clock and data.
The modern digital systems use the integrated circuits?
The modern devices that use integrated circuits are :Lab topsDVDsProcessorsPhonesAlmost anything containing electronics.
What is the difference between master and slave setting for a hard drive?
The difference is very technical... One of the devices, called the "master", is in control of the data transmission, the other one "obeys". All you really need to know is that if one device is the master, the other must be the slave. It doesn't matter much which is which.
What is the difference between a master cylinder and slave cylinder?
The primary difference between a master and a slave cylinder is which one make the other one work. We operate the master cylinder to make the slave cylinder work. The master cylinder on a hydraulic clutch is actuated by pushing on the clutch pedal. The hydraulic pressure then makes the clutch slave cylinder move and it pushes out to give the throw-out arm a shove. This will disengage the clutch from the flywheel (by actuating the pressure plate). the master cylinder is on the fire wall its the main one, when you push on the brake pedal down it pushes on a rod in the master sylinder. the wheel cylinders (slave) are on the dram drums. they push the brake shoes to the drum
What is the difference between slave morality and master morality according to Friedrich Nietzsche?
Nietzsche described master Morality is some kind of honor, creator of values, art, nobility...while slave Morality is friendship, and compassion. Slave morality speaks against power believes it to a negative. For Nietzsche, master morality is detrimental to freedom.
Quotations from Robinson Crusoe about the relationship between man and nature?
the ralationship between robinson crusoe and friday seemes to be like the relationship between master and slave crusoe is the master and friday in the slave he should serve his master as soon as he lives
What is the meaning of Master-slave communication protocol?
A master-slave communication protocol allows hardware components to communicate between them. A component is either a master or a slave. A master initiates the communication and sends requests. A slave only receives the requests, acknoledges, threats and sends a response. A slave cannot initiates a communication.
What did Hegel believe about the relationship between slave and master, and how did he characterize it as dialectic?
Hegel believed that the relationship between slave and master was a dialectic process where both roles shaped each other's identities. The master's power over the slave led to the slave's labor, which in turn contributed to the master's wealth and status. This dynamic created a cycle of dependence and independence that ultimately drove history forward.
What is the difference between master IDE and slave IDE?
Each IDE slot can handle two drives. One drive will be the master and the other will be the slave depending o the configuration. If the jumpers of one drive is configured to set the drive as MA (Master), the second must be configured to SL (Slave). Both drives may be configured as CS (Cable Select), if so, The positioning on the ribbon cable will determine whic one is the master and which is the slave
Was William Wells Brown a slave master?
No, he was a slave who escaped from his master.
What is a slave cycle?
A slave cycle is a synchronized data transfer process between a master device and a slave device in a computer system. It involves the master device initiating communication with the slave device to exchange data or commands in a predefined sequence. This cycle allows for the orderly and efficient transfer of information between devices.
What is the difference between slave and slavery?
Nothing. They are the same thing. A slave is the person. Slavery is the condition.
What is the difference between an apprentice and a serf?
Serfs have to do their lords work, all day, Kinda like a slave, whereas Apprentice can learn one job and master it.
When was Internet Slave Master created?
Internet Slave Master was created in 2001.
