0
What is the expected amplification of a BJT transistor amplifier if the dc supply is set to zero volts?
Wiki User
∙ 7y ago
It is almost equal to zero volts because no device in this universe can amplify the power --output will be in confine to millivolt or less due to applied magnitude of input signal and ambient noise
according to principle Energy can't be created nor destroyed it can only be transferred from one form to another form.
Wiki User
∙ 11y ago
Wiki User
∙ 7y agovery simple, zero.
Add your answer:
Earn +20 pts
Working of npn transistor?
N-p-n transistor is made by sandwiching thin layer of p-type semiconductor between two layers of n-type semiconductor. It has three terminals, Emitter, Base and collector. The npn transistor has two supplies, one is connected through the emitter base and one through the collector base. The supply is connected such that emitter-base are forward biased and collector base are reverse biased. It means , Base has to be more positive than the emitter and in turn, the collector must be more positive than the base. The current flow in this type of transistor is carried through movement of electrons. Emitter emits electrons which are pulled my the base as it is more positive. these end up in the collector as it is yet more positive. In this way, current flows in the transistor. Transistor can be used as an amplifier, a switch etc.
Working of RC coupled amplifier?
In a two stage RC coupled amplifier, the two transistors are identical and a common power supply is used. The input is provided to the first stage of the amplifier where it is amplified and this output is used as input for the second stage. This is amplied once again by the other transistor in the second stage and the final output is obtained. There will be a 180 degree phase shift after the first stage amplification which is nullified by the 180 degree phase shift of the second stage amplification.Thus, we obtain an output which is an amplified signal of the input and is in phase with the input signal.
Basic theory of two stage RC coupled amplifiers?
connections are to be made per the crkt the main of this crkt is to make strong or to bost the signal comming to the crkt input is given with ac supply and they are connected to resistor and capacitor when the ac suppply is given it contains slight amount of dc supply so to block the dc supply capacitor is used and the dc supply is given at the collector so that resistor present at c and ground gets biased then another capacitor used at c to ground for removing the dc supply then out put seen on cro across collector to ground we get the perfect amplified signal the more we give the coupled amplifer the most amplfed sgnal we get
What are sleep transistors?
A rest transistor is either a pMOS or nMOS high VT transistor and is utilized as a change to close off force supplies to parts of a configuration in standby mode. The pMOS rest transistor is utilized to switch VDD supply and henceforth is known as a "header switch."
What is breakdown region?
The breakdown region of a transistor is the region where the supply voltage, Vcc, becomes so large that the collector-emitter junction of the transistor breaks down and conducts, even though there is no base current.
What is the expected amplification of a BJT transistor amplifier if the dc supply is set zero volts?
very simple, zero.
What is the expected amplification of a bjt transistor amplifire if the dc supply is set zerovolts?
A: In mathematics it is learned that any part,number, items,are equal to zero if mulitplied by zero
How do you design a RC coupled bjt amplifier using pnp transistor?
same as you would using an NPN, except the supply voltages are reversed
What is the explanation for the working CE BJT amplifier?
In electronics, a common-emitter amplifier is one of three basic single-stage bipolar-junction-transistor (BJT) amplifier topologies, typically used as a voltage amplifier. In this circuit the base terminal of the transistor serves as the input, the collector is the output, and the emitter is common to both (for example, it may be tied to ground reference or a power supply rail), hence its name.
Can an amplifier can be operated on ac supply?
Yes, an amplifier can be operated on ac supply.
Working of npn transistor?
N-p-n transistor is made by sandwiching thin layer of p-type semiconductor between two layers of n-type semiconductor. It has three terminals, Emitter, Base and collector. The npn transistor has two supplies, one is connected through the emitter base and one through the collector base. The supply is connected such that emitter-base are forward biased and collector base are reverse biased. It means , Base has to be more positive than the emitter and in turn, the collector must be more positive than the base. The current flow in this type of transistor is carried through movement of electrons. Emitter emits electrons which are pulled my the base as it is more positive. these end up in the collector as it is yet more positive. In this way, current flows in the transistor. Transistor can be used as an amplifier, a switch etc.
Why class AB amplifier have high efficiency?
A class AB amplifier of the complementary transistor type has two transistors in series. Both transistors can change the resistance. If the upper transistor, a npn type, has minimum resistance and the lower transistor, a pnp type, has maximum resistance, the output voltage is near the supply voltage. One transistor is totally open and has zero current, the other transistor is totally closed and has zero voltage. Working together both transistors can set the output to any voltage between 0 and supply voltage. The class AB efficiency maximum is 100% minus the bias-power, see for example D. M. Snider, "A Theoretical Analysis and Experimental Confirmation of the Optimally Loaded and Overdriven RF Power Amplifier", 1966. Today the overdriven class AB amps are called class D.
Working of RC coupled amplifier?
In a two stage RC coupled amplifier, the two transistors are identical and a common power supply is used. The input is provided to the first stage of the amplifier where it is amplified and this output is used as input for the second stage. This is amplied once again by the other transistor in the second stage and the final output is obtained. There will be a 180 degree phase shift after the first stage amplification which is nullified by the 180 degree phase shift of the second stage amplification.Thus, we obtain an output which is an amplified signal of the input and is in phase with the input signal.
What is effect on amplitude shift keying modulation and demodulation due to use of transistor SL100?
The SL100 is a PNP medium power transistor, suitable for use up to ~100MHz. This can be used in the power amplifier stage, with the output connected to a tuning network/transformer + antenna for AM modulation. It's purpose, if used in this application, is to supply current (usually a voltage amplifier circuit will precede this one) to drive the antenna.
Can you amplify DC voltages?
Yes, certainly - an operational amplifier circuit (see e.g. Wikipedia) will do this. For instance, a non-inverting amplifier circuit with a gain of 10 will give 1.0V output for 100mV input, 2.0V for 200mV, and so on (limited by the supply voltage of the amplifier). Physical sensors such as thermocouples or strain gauges often need DC amplification to make their outputs easier to measure.
How does power amplifier differ from a conventional voltage amplifier?
A voltage amplifier does not have to supply significant current bur a power amplifier does.
Why amplifier does not uses ac to work?
ac is not used because it produces distortion in the output. and also in the transistor the Q point is not able to be fixed by using ac supply. Q point gives the quality output to the amplifiers
