0
The back to back connected zener diodes can be used as an AC regulator producing what is jokingly called a "poor man's square wave generator". Using this arrangement we can clip the waveform between a positive value of +8.2V and a negative value of -8.2V for a 7.5V zener diode. If we wanted to clip an output waveform between different minimum and maximum values for example, +8V and -6V, use would simply use two differently rated zener diodes.
http://www.electronics-tutorials.ws/diode/diode_7.html
What else can I help you with?
Can you make a transistor by connecting two diodes back to back?
Two diodes, whether or not discreet, cannot work together as a transistor. The diodes and transistor have different profiles to optimize them for their specific functions
How does a zener diode work in forward bias?
Like a normal diode............. unless it includes a "back biased" diode to prevent conduction in this mode as is common in zener diodes rated at about 10 volts or more, then it acts as an open circuit.
How much voltage appears across a zener diode when it is forward-biased?
That depends on the zener voltage rating:"low voltage" zeners are just a simple single diode, the zener diode"high voltage" zeners contain 2 back to back diodes in one package, the zener diode and an ordinary diode that is reverse biased when the zener diode is forward biased to block forward conduction of the zener and protect it from overcurrent damage if installed backwards by mistakeThus in "low voltage" zeners when forward biased they will have a normal diode drop (e.g. 0.7V), but "high voltage" zeners when "forward biased" they will act open due to the reverse biased blocking/protection diode in series with the zener.
What is a thyrector diode?
A Thyrector is essentially two zener diodes connected back-to-back in opposing polarity which means it will not conduct until an over-voltage above its break-down voltage rating occurs. This is used to trap voltage spikes and suppress them.
What will happens if zener diode and resistance are connected in parallel?
If diode is connected in series then current will flow only in one direction. ie. Current flow occurs only when diode is forward biased. ANSWER: It depends are the diodes are connected in series if they are back to back no current will flow if connected in the forward conduction mode then they will conduct.
Can you make a transistor by connecting two diodes back to back?
Two diodes, whether or not discreet, cannot work together as a transistor. The diodes and transistor have different profiles to optimize them for their specific functions
How many diode makes one transistor?
When investigated with an ohm-meter, a transistor resembles two diodes connected "back-to-back". But you can't make a transistor by connecting two diodes back-to-back.
How does a zener diode work in forward bias?
Like a normal diode............. unless it includes a "back biased" diode to prevent conduction in this mode as is common in zener diodes rated at about 10 volts or more, then it acts as an open circuit.
Why dont we get the transister action by connecting two diodes back to back?
Because two diodes is not a transistor. There is an interaction between the junctions in the transistor, because of their proximity, that you don't get in the two diodes. The only use of modeling a transistor as two diodes back to back is to test a transistor with a multimeter as a quick go-nogo test for basic operability.
Are diode forward and zener voltages the same?
A: Both diodes have the same curve in the forward direction however if the zener voltage is reverse it will breakdown at a particular voltage and remain conducting at the voltage. A regular diode will not do that the to voltage will fold back after breakdown to any voltage
How much voltage appears across a zener diode when it is forward-biased?
That depends on the zener voltage rating:"low voltage" zeners are just a simple single diode, the zener diode"high voltage" zeners contain 2 back to back diodes in one package, the zener diode and an ordinary diode that is reverse biased when the zener diode is forward biased to block forward conduction of the zener and protect it from overcurrent damage if installed backwards by mistakeThus in "low voltage" zeners when forward biased they will have a normal diode drop (e.g. 0.7V), but "high voltage" zeners when "forward biased" they will act open due to the reverse biased blocking/protection diode in series with the zener.
How can you designed transistor using diode because no available transistor?
You cannot build a transistor with two diodes. Even though the static junction characteristics of a transistor "looks like" two back to back series diodes, there is a relationship between the two junctions that cannot be matched by just connecting two diodes together.
What is a thyrector diode?
A Thyrector is essentially two zener diodes connected back-to-back in opposing polarity which means it will not conduct until an over-voltage above its break-down voltage rating occurs. This is used to trap voltage spikes and suppress them.
What will happens if zener diode and resistance are connected in parallel?
If diode is connected in series then current will flow only in one direction. ie. Current flow occurs only when diode is forward biased. ANSWER: It depends are the diodes are connected in series if they are back to back no current will flow if connected in the forward conduction mode then they will conduct.
What is back to back diode?
A: Refers two two diodes connected as it say back to back for gates applications.
Why do we have back dimples and what is their purpose?
Back dimples, also known as "dimples of Venus," are indentations on the lower back that are caused by a short ligament connecting the skin to the underlying bone. The purpose of back dimples is not entirely clear, but they are believed to be a genetic trait and may be associated with better circulation and muscle structure in the lower back area.
You want to solder a broken zener diode back together with liquid solder?
This is not possible. You must replace the diode.
