So that the living organisms and other wires/metals are not affected by the current in a given wire. In the absence of insulation two wires coming in contact may cause short circuit and also there is a risk of death of the living organisms coming in contact. There is one more reason that insulation minimizes charge leakage from the wire.
The action of removing insulation for a wire is called stripping.
The plastic is a form of insulation. Insulation used to be made from non-plastic materials like cloth. It protects the wire from the outside world. Without insulation the electricity would cause shocks, fires, and short circuits.
Yes, as long as the different wire is of the same size or larger and has the same insulation factor as the original wire.
The main insulation factors of the wiring used in every day use are 60, 75 and 90 degrees C. A #6 wire can be any of the above. The higher the insulation factor, the higher the ampacity of the wire becomes. For a #6 wire the amperage is 60 C - 55 amps, 75 C - 65 amps and 90 degrees C - 65 amps.
Sorry, there is no such wire size as "30 gauge" in the AWG (American Wire Gauge) system. For the ampacity rating of all standard conductor sizes, go to Table 310-16 of the National Electric Code. If you mean what wire size will carry 30 amps then a #10 copper wire insulation rating of 90 degree C is rated at 30 amps.
Commonly, an electric wire which has insulation that is worn, torn, cut or damaged in some way.
It's actually a magnetic field, not an electric field, but the answer is 'Yes'. Pass some DC ... like from a battery that's operating a flashlight bulb ... through an insulated wire, and lay the wire over a compass. You'll plainly see that somethingthat affects the compass got through the insulation.
It is not 'insoluted wire'. That one in named as ' insulated wire' Usually metallic wire carries the current. Just to avoid electric shock it is to be covered by insulators such as rubber or plastic. Some times we use nickel coating which also serves the purpose of insulation.
it gives you an electric shock
Hairdryers often have a double-insulated design, which means they have an extra layer of insulation to protect against electric shocks. This eliminates the need for an earth wire in the cable because the double insulation provides adequate protection against electric leakage.
A neuron is analogous to an electric wire. If you look at an electric wire going from a lamp to a wall plug, you do not see the actual wire. Instead, you see the insulation. If you would scrape off the insulation, you would see two wires. If those two wires touched you would hear a loud pop. Then a circuit breaker would throw. The wire would be just as good as it was before you removed the insulation. The wire carried the electricity. The insulation protected the wire and let it do its job. Without the insulation, the bulb would not work. The Myelin sheath protects the nerve from outside forces. It lets it carry its signal free from outside influence. It is a piece of insulation.
Magnetic wire has a coating of varnish for an insulation.
The action of removing insulation for a wire is called stripping.
To use wire strippers effectively for stripping insulation from wires, first select the appropriate size notch on the wire stripper that matches the gauge of the wire. Place the wire in the notch and squeeze the handles together to cut through the insulation. Gently pull the wire stripper away from the wire to remove the insulation. Be careful not to cut into the wire itself while stripping the insulation.
The purpose of using three different colored wires in an electric iron is to distinguish between the live wire (typically red), neutral wire (typically black or blue), and the earth wire (typically green or yellow). This helps ensure that the electric iron is wired correctly and safely.
To remove insulation from electrical wires using wire strippers, place the wire in the appropriate gauge slot, squeeze the handles to cut through the insulation, and then pull the insulation off the wire. Be careful not to cut into the wire itself.
An electric lamp may be dangerous to use if its wire has lost its insulation. Attics are lined with insulation to help maintain a comfortable temperature in the house. The colonial powers ended Japan's self-imposed insulation from the Western world.