impedance/resistance
Output Power divided by Power Factor.
There is no disadvantage of unity power factor, because at unity power factor all the electrical power is efficiently utilized by the the load, and at lagging power factor some power is lost in the load's magneticfield.
There is no such thing as a 'low power-factor' wattmeter. A wattmeter always reads true power, regardless of the load's power factor.
Power Factor Improvement Panel. It controls power factor
The 0.8 Power Factor provided by generator manufacturers is not the load power factor, but it is the nominal power factor used to calculate the kW output of an engine to supply the power for a particular alternator kVA output. Alternators are therefore designed to supply their rated kVA at 0.8 lagging power factor.
The tendency to converge the rays decides the power factor. So shorter the focal length converging is tremendous. Hence power is reciprocal of focal length
the reciprocal is a factor by which you multiply a given number so that their product is 1. ex. 3/5 is the reciprocal of of 5/3.
The reciprocal of the fraction is simply the fraction raised to the -1 power. Simply "flip the fraction upside down" to find the reciprocal. e.g. 3/23 has a reciprocal of 23/3.
You change the sign of the exponent. For example, the reciprocal of 2 to the power 8 is 2 to the power -8. Alternately, you can change the whole expression to the denominator. In this case, the reciprocal of 2 to the power 8 is 1 divided by (2 to the power 8).
It does not work that way. A negative power is simply the reciprocal. So that x-a = 1/xa The reciprocal is negative or positive according to whether the number itself is negative or positive. [And, if the number is 0, the reciprocal is not defined.]
The expression Y-2 is 1/Y2. The reciprocal of 1/Y2 is Y2.
The reciprocal of any expression is 1 divided by that expression. In this case, the reciprocal of x2 is 1/x2. This can also be written as (1/x)2, or as x-2.
Power factor is the cosine of the phase angle between voltage and current. In a purely resistive load, like a toaster, since the phase angle is zero, the power factor is 1. In a theoretically purely inductive or capacitive load, with the phase angle at 90 degrees, the power factor is 0. Power factor is also the ratio of apparent power versus true power, or watts versus volt-amperes.
By a factor of ten gagillion in the anal reciprocal lard storage unit
That's known as the multiplicative inverse or reciprocal.
Take the 'reciprocal' of the given scale factor to go the other way. The 'reciprocal' of a number is 1/(the number). 3 ==> 1/3 5 ==> 1/5 1/7 ==> 7 2/3 ==> 3/2 etc.
To find the reciprocal of ( \frac{3.56}{10^4} ), first calculate ( \frac{3.56}{10^4} ), which equals ( 0.000356 ). The reciprocal is then ( \frac{1}{0.000356} ), which can be calculated as approximately ( 2809.04 ). Thus, the reciprocal of ( \frac{3.56}{10^4} ) is about ( 2809.04 ).