Current gain configuration is the change in collector current divided by the change in the emitter current. Its symbol is hfe, or h-parameter.
current gain
the symbol of current density is 'J'. & its unit is (Amp/m^2)
The hFe (current gain) on the BC148 ranges from a minimum value of 20 to 100, depending on collector current, with a maximum value of 300.
GAIN is a function of load current but basically a small current in the base will make a big change of collector current therefore making a transistor a voltage amplifier as opposed to a current amplifier
A: The gain of a transistor is not linear and even that varies from component to component. The gain can vary greatly depending on the Ic current and the load. Manufactures only give out a typical gain for a particular current. As a rule the lower the Ic current the higher the gain. To really find out what a particular transistor characteristics are a tektronik curve tracer is used.
current gain
FETs don't have current gain as no current flows through the gate. The gain of a FET is a voltage gain and is called mu.
Current gain is the ratio of output current divided by input current. Voltage gain is the ratio of output voltage divided by input voltage. Nothing more complicated than that.
The symbol for electric current is I
A
cc/ce/cb doesn't give the no current gain
If Beta is infinite, then the current gain will be unity.
The symbol is Se(2-).
I is the international (SI) symbol for electrical current.
The current gain in CE mode called as beta (ß) Tha current gain in CB mode called as alpha (A) ß= A/(1-A) =0.98/(1-0.98) =49 the current gain is 49 in CE mode
1
Amperes are the units; 'I' is the symbol chosen to represent amperage.