GAIN is a function of load current but basically a small current in the base will make a big change of collector current therefore making a transistor a voltage amplifier as opposed to a current amplifier
The gain of an r-c coupled amplifier falls at high frequency because the capacitive reactance of the capacitor tends to zero.
Darlington amplifier has more gain when compared to cascade amplifier .
Due to high input impedence curret gain is high
what is the other name of common emitter amplifier
this Raman amplifier is used for long distance in dwdm technology. Basically this amplier has high gain...
1)in cc configuration we use to get the low output impedence where as in ce we use to get the high output impedence. 2)in cc amplifier we use to have the voltage gain equal to unity where as in ce amplifier we use to have the high voltage gain. 3)in cc amplifier there is high power gai which is used for impedence matching where as in ce amplifier due to the high voltage gain the impedence matching is less impossible.
Gain of ce-cb cascode is nearly equal to the gain of ce amplifier, because in a ce-cb cascode, the gain of the ce stage is equal to 1, and the gain of the cb stage is nearly equal to an isolated ce amplifier. Hence, gain of both are nearly equal. On the other hand, Bandwidth of ce-cb cascode is much higher than the bandwidth of ce amplifier because the cb stage in the cascode configration is not subjected to any Miller effect, thereby improving the high frequency response. The absence of Miller effect is due to the fact that the base of the cb stage is grounded thus, shielding the collector signal from being fed back into the emitter input. To be more clear, the gain of CE stage in cascode is nearly 1, which reduces the miller effect on the cb stage greatly.
Disadvantages of CE amplifier:1. It has a high output resistance.2. It responds poorly to high frequencies.3. It has high thermal instabilities.4. It's voltage gain is very unstable.
The signal gain of a CE BJT amplifier is hFe or collector resistance divided by emitter resistance, whichever is less.
A: REFERS TO A common emitter amplifier
The gain of an r-c coupled amplifier falls at high frequency because the capacitive reactance of the capacitor tends to zero.
b'cose the gain of the amplifier is high ..
Darlington amplifier has more gain when compared to cascade amplifier .
Gain in a CE configuration of a BJT is collector resistance divided by emitter resistance, subject to the limit of hFe. The emitter bypass capacitor will have lower impedance at high frequency, so the gain will be higher at higher frequency, making this a high-pass amplifier.
Due to high input impedence curret gain is high
what is the other name of common emitter amplifier
this Raman amplifier is used for long distance in dwdm technology. Basically this amplier has high gain...