0
What else can I help you with?
What is type 1 and type 2 semiconductors?
Type 1 Semiconductors: The bandgap of one semiconductor is completely contained in the bandgap of the other one. In double heterostructure design carriers will be confined in the smaller bandgap material. this structure is used to form barrier/quantum well in Multi quantum well lasers and LEds Type II: like Type I The bandgap of the two materials overlap but the changes in the conduction and valence bands change sign. this type of materials do not use for light emiiting application as carriers can not be confined.
What is the main characteristic of a Butterworth filter?
Butterworth filter works as an ideal low pass filter.Butterworth filter is best suited for the closed loop gain to be as close to 1 as possible within the passband.Roll-offs become steeper,they approach the ideal filter more closely.
What are the conditions in application of superposition theorem?
Superposition theorem can be applied if- 1) The network is linear 2) The solution of the network is unique
How is ASIC related to FPGA?
1. Both ASIC and FPGA are IC's2. However ASIC Application Specific IC the functionality is Fixed.3. In SAME FPGA Field Programmable Gate Arrays various different types of Application can be programmed. And that too in the Field.
What are the types of ADC?
Types Of ADC Are As follows: 1.Counter type ADC 2.Successive approximation type ADC 3.Flash Type ADC 4.Wilkinson type ADC
Can you always find a prime number between any number and its double?
Yes, if you take the range to be inclusive, it even works for 1, since 2 is prime. The theorem related to this question is called Bertrand's Postulate, or Chebyshev's Theorem, or the Bertrand-Chebyshev theorem.
1 What type of application software is required to access a website?
A browser.
Does a 2002 cavalier have a regular oil filter?
It has a cartridge type filter not a crew on type filter. It is located on the front of the engine just to the left of the P/S fluid reservoir. You will see a black plastic cap with a 1 1/4" nut. Remove this plastic cap to get to the cartridge filter. Go buy the filter and you will know what it looks like.
When should I replace my furnace filter?
You should replace your furnace filter every 1-3 months, depending on the type of filter and how often you use your furnace.
Why does oil leak out from eng 1 inch above filter?
wHAT TYPE OF VEHICLE?
Third- and fourth-kind polynomials CHEBYSHEV?
Yes, there are Chebyshev polynomials of the third and fourth kind, not just the first and second. The third kind is often denoted Vn (x) and it is Vn(x)=(1-x)1/2 (1+x)-1/2 and the domain is (-1,1) Chebychev polynomials of the fourth kind are deonted wn(x)=(1-x)-1/2 (1+x)1/2 As with other Chebychev polynomials, they are orthogonal. They are both special cases of Jacobi polynomials.
What is chebychev's rule?
Chebyshev's rule, also known as Chebyshev's inequality, is a statistical theorem that describes the proportion of values that fall within a certain number of standard deviations from the mean in any distribution. It states that for any set of data, regardless of the shape of the distribution, at least (1 - 1/k^2) where k is greater than 1, of the data values will fall within k standard deviations of the mean.
How often should the filter in a furnace be replaced?
The filter in a furnace should typically be replaced every 1 to 3 months, depending on the type of filter and the level of usage.
State the main reason for using the empirical rule rather than chebyshevs theorem?
The empirical rule can only be used for a normal distribution, so I will assume you are referring to a normal distribution. Chebyshev's theorem can be used for any distribution. The empirical rule is more accurate than Chebyshev's theorem for a normal distribution. For 2 standard deviations (sd) from the mean, the empirical rule says 95% of the data are within that, and Chebyshev's theorem says 1 - 1/2^2 = 1 - 1/4 = 3/4 or 75% of the data are within that. From the standard normal distribution chart, the answer for 2 sd from the mean is 95.44% So, as you can see the empirical rule is more accurate.
How can common salt be separated from sand?
1. Put this mixture in water and stir. 2. Filter the suspension on paper filter or other type of filter. 3. The sand remain on the filter and the salt in the filtrate.
When is the recommended time for a carrier furnace filter replacement?
The recommended time for a carrier furnace filter replacement is every 1 to 3 months, depending on usage and the type of filter.
What type of wrench to use when changing a 2011 KIA oil filter?
1 1/8 or 27mm socket
