0
What will happen if we slip rings are used in motors intead of commutator?
Wiki User
∙ 9y ago
If slip rings are used, a dc field current fed to the rotor through the slip rings causes a magnetic field that rotates with the rotor. This is used in synchronous motors and also in alternators in cars and power plants.
In a car alternator the dc current supplied to the rotor is used to control the votage generated in the stator, which is connected through diodes directly to the battery.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Purpose of slip rings?
slip ring is connect on shaft of motor to collect current from commutator without any complicate connection and with use of it resistors can be insert in circuit and therefore speed control of motor can easily achive
How can you determine the difference between an AC or DC electric motor?
Direct current or DC electric motors work for situations where speed needs to be controlled. DC motors have a stable and continuous current. DC motors were the first and earliest motors used. They were found, however, to not be as good at producing power over long lengths. Electric companies found using DC motors to generate electric did not work because the power was lost as the electric was transmitted. Brush DC motors use rings that conduct the current and form the magnetic drive that powers the rotor. Brushless DC motors use a switch to produce the magnetic drive that powers the rotor. Direct current motors are often found in appliances around the home. Alternating current or AC electric motors are used differently based on what type of AC motor it is. Single phase AC motors are known as general purpose motors. They work well in many different situations. These AC motors work great for systems that are hard to start because they need a lot of power up front. Three phase, also called polyphase, AC motors are usually found in industrial settings. These motors also have high starting power built transmit lower levels of overall power. AC power gets its name from the fact that it alternates in power. The amount of power given off by an AC motor is determined by the amount of power needed to operate the system. garyDC motors are of mainly 3 types.series motors, shunt motors, and compound motors. DC motors are mainly used where high torque is required from less speed (rpm),and a constant rpm can be maintained.Used mainly in : lathe ,drill machines, grinding machines, compressors and so on.Ac machines have less expenses. Used widely because Ac is more popular. They have less torque on slow speeds.Used on cooling fans, water pumps etc.
Why are slip rings used in an AC generator but not in a DC generator?
Slip rings provide a means for connecting the rotating armature of a simple a.c. generator to an external circuit. As the armature naturally produces an alternating voltage, an alternating voltages is what appears across the slip rings.To obtain a d.c. voltage, it's necessary to reverse the direction of the natural alternating voltage every half cycle, producing full wave rectification. This is achieved using a split-ring commutator which, essentially, is a rotating switch.So, slip rings are used with simple a.c. generators, whereas a commutator is used with d.c. generators.Having said that, however, large modern a.c. generators (alternators) have fixed armatures, and rotating fields, and slip rings are used to supply d.c. field current to the alternator's rotating field windings.
How many Slip rings in synchronous motor?
If the synchronous motor is single phase then there are two slip rings & if this motor is three phase so the slip rings are three in number. Correction; I have never seen a single phase synchronous motor. It would cost more that it was worth. A synchronous motor has a separately excited field. If the excitation comes from a stationary DC source it has 2 slip (collector) rings. A brushless induction motor has no slip rings because the exciter armature rotates and so do the rectifiers. A permanent magnet motor, used with variable frequency drives, is another type of synchronous motor that has no slip rings. A three phase motor with 3 slip rings is a Wound Rotor motor. Wound rotor motors are variable speed motors that were used for such applications as bridges and cranes before variable speed drives.
What is interpole in dc motors?
the armature current is brought thru the interpole winding near the brushes this shifts the electrical null to reduce arcing with heavy loads there were arrangements with small motors to shift the brush holder rings but the interpole has no moving parts and works under all loading conditions
What is the function of a split ring commutator?
The split rings cause the direction of the magnetic field in the armature to change direction as the motor rotates. If this didn't happen the motor would not rotate. Slip rings can be used for an AC motor which causes the direction of the magnetic field to change with the AC waveform.
What is the basic difference between carbon brush of AC slip ring motor and carbon brush of Direct current commutator motor?
The only difference between slip rings and commutator is that commutator can change the frequency where as the slip rings can not do it.
What happens if commutator of DC generator is removed?
If the commutator is removed from your generator, you (if you connect slip rings) get AC supply instead of DC supply. the function of the commutator is to convert AC to DC supply and vice versa.Additional AnswerRemoving the commutator will also prevent you from connecting the output of the generator to its load. Remember, the generator's armature is spinning!
Purpose of slip rings?
slip ring is connect on shaft of motor to collect current from commutator without any complicate connection and with use of it resistors can be insert in circuit and therefore speed control of motor can easily achive
In the generation of electricity commutator would be used on an alternating current generator and slip rings would be used on a direct current generator?
No. Just the opposite. An AC alternator uses slip rings, a DC generator uses a commutator. Most modern auto alternators are in fact AC alternators that rectify the AC output to DC using a diode bridge.
How commutator converts AC to DC?
There is no conversion of AC to DC a commutator is the key to creating straight DC voltage. "The commutator rotates with the loop of wire just as the slip rings do with the rotor of an AC generator. Each half of the commutator ring is called a commutator segment and is insulated from the other half. Each end of the rotating loop of wire is connected to a commutator segment. Two carbon brushes connected to the outside circuit rest against the rotating commutator. One brush conducts the current out of the generator, and the other brush feeds it in. The commutator is designed so that, no matter how the current in the loop alternates, the commutator segment containing the outward-going current is always against the "out" brush at the proper time. The armature in a large DC generator has many coils of wire and commutator segments. Because of the commutator, engineers have found it necessary to have the armature serve as the rotor(the rotating part of an apparatus) and the field structure as the stator (a stationary portion enclosing rotating parts). Which is the inverse of an AC Generator."
Why field producing winding of 3 phase induction motor made stationary?
Because the motor is much simpler and easier to design when the electrical power is supplied to the stator, while the rotor is a short-circuited copper cage. It allows the motor to work with no commutator or slip rings, so induction motors are quiet and have a very long life.
When did Chaos Rings happen?
Chaos Rings happened in 2010.
When did Rings of Medusa happen?
Rings of Medusa happened in 1989.
When did Chaos Rings II happen?
Chaos Rings II happened in 2012.
What is the purpose of o rings?
They are used to seal motors or machines and rotatin pump shaft or hydraulic cylinder pistons.
When did Bored of the Rings - video game - happen?
Bored of the Rings - video game - happened in 1985.
