the voltage across that resistor will increase if it is in series with the other resistors.
the current through that resistor will increase if it is in parallel with the other resistors.
If they are connected in series the total resistance will decrease, if they are parallel connected so we remove some resistor so the total resistance will be increases.
The system will lose it's regenerative braking function, if there is no other means to stop the motor it will coast to a stop.
Nothing happens to the resistor other than it may interact with the other components so as to perform a desired function.
Only frequencies in the pass band range will be allowed through the circuit. Other frequencies will be attenuated based on the RC values picked.
It slows down the speed of the electrons , which are all passing through the resistor
In order to determine this, it will be necessary to find which resistor 'maxes out' at the lowest voltage. This can be found using the equation Vi=sqrt (Pi*Ri) for each resistor, where Pi is the power rating of resistor i and Ri is the value of resistor i. Once this is found, the power dissipation of each other resistor can be found using the equation Pi=(Vl^2)/Ri, where Vl is the voltage that maxes out the resistor which maxes out at the lowest voltage, and Ri is the resistance of each resistor. The equivalent power rating would then be the sum of the power dissipated across each resistor.
For the individual resistor, the current is constant, regardless of any other resister that's attached to it in parallel. The current that results from all the resistors combined decreases as the resistance of one or more of the resistors increases.
people would kill each other the plankton population would increase
Inverse proportion is when one value increases, as the other decreases. For example the number of builders building a wall and the number of days it takes to build a wall are 2 quantities in inverse proportion because the more builders there are, the less time it takes to build the wall (there are more people working on it, so it will be built quickly). As the number of builders increases, the number of days to build the wall decreases. This is inverse proportion.
One thing that could happen is that the force that acts between them decreases.
The system will lose it's regenerative braking function, if there is no other means to stop the motor it will coast to a stop.
The price of oil will increase as the supply decreases.
Direct. For example, if a number is inversely proportional to something, it increase as the other one decreases. Ifa number is directly proportional to something, it increases as the other one increases.
two, if both are resistorsone, if the resistor is in parallel with any other typeof component
The volume it occupies also decreases. The pressure it exerts also decreases. The rate at which it will react with other substances also decreases.
as one thing increases the other increases and as one decreases the other decreases. they directly influence the each other
Nothing happens to the resistor other than it may interact with the other components so as to perform a desired function.
The air will cool down, while the other object gets hotter.