The unintended resistance results a voltage drop
Ohm's law: Voltage = Amperes times Resistance. This means that increasing voltage while keeping resistance the same must result in an increase of current.
Parasitic resistance is resistance that you encounter in a circuit board or integrated circuit but not included in the original design -- an undesirable, unintended consequence of putting a concept into manufacturing. Since parasitic resistance does exist, you need to estimate its value and make sure the design still functions as intended. An example of parasitic resistance is the resistance of the traces in a circuit board or metal interconnects in an IC, the purpose of which is to connect components electrically according to the circuit diagram, but these connecting structures are not ideal. These connecting structures most likely also add parasitic capacitance and inductance to your design and, if substantial, should be included in your design (back-annotation) accordingly.
As the name implies, resistance resists current. In the mathematical formula, where E is electromotive force (voltage):- I = E/R If you increase the value of R (resistance), then the value of I (current) decreases.
Ohm's Law: Resistance = Voltage divided by current110 volts / 2 amperes = 55 ohmsNote: This represents 220 watts, which is a considerable amount of power for a resistor. In all likelihood, the resistance will change as a result of that amount of power (heat) so the end result, 55 ohms, is only valid as an absolute number, in that 55 ohms is the answer, but the cold value of the resistor is uncertain.
B - Dynamic resistance
A circuit with very little (or no) resistance, that causes and unintended crossing of the circuit pathways.
high tariffs
high tariffs
Marketing relativism is a subtle and unintended result of cultural conditioning.
Revolutions bring change. It may not always bring the desired change and there are often unintended consequences as a result.
A short circuit occurs when an unintended connection is made between two points in an electrical circuit, causing a low resistance path for the current to flow. This can result in excessive current flow, overheating, and potentially damaging the circuit components. Short circuits are typically identified and resolved by locating and fixing the unintended connection.
short or short circuit
unintended results
Intended consequences of biotechnology include the development of genetically modified crops that can increase yields and reduce the need for chemical pesticides. Unintended consequences may include the unintended spread of genetically modified organisms in the environment and potential disruption of local ecosystems.
The Unintended was created in 2004.
Unintended was created in 1999-04.
"Repercussions" refers to the unintended consequences or effects that result from an action or event. It often implies a negative impact or backlash.