Choice of electricity defines ac and dc
Which choice defines AC and DC correctly?
well the difference mainly exists in the method of finding them , these are :-1. in finding DC load line :-open all AC sourcesopen all the capacitors2. for AC load line:-open all the Dc sourcesshort all the capacitors.
formula for ac to dc
A dc series motor can work on dc and ac because dc motors are totally reversible.
If having DC and AC is required then a PWM pulse width modulator is required to chop the DC to make AC
Yes, if you provide a rectifier to convert the AC into DC. This is how early AC voltmeters worked. They rectified the AC into DC, and the DC voltmeter measured something related to the peak voltage. In order to calibrate, you then considered that RMS voltage is peak voltage divided by the square root of 2. The problem with that approach is that it only works for sinusoidal AC. If the AC is some other shape, such as square or triangular, then the calibration does not work correctly. Modern AC voltmeters measure true RMS using signal processing techniques. If you attempt to measure AC with a DC voltmeter without a rectifier, it may or may not work, depending on the design of the meter. An ordinary VOM style meter would read zero, because the average voltage of an AC waveform is zero.
mainly AC but can be DC if done correctly
It is depends on the application. If we need any variable speed in motor, dc motor will be better choice.
Edison was promoting DC as the safer choice. Tesla worked for Westinghouse who promoted AC as it was far more cost effective and couple be sent over far greater distances
formula for ac to dc
well the difference mainly exists in the method of finding them , these are :-1. in finding DC load line :-open all AC sourcesopen all the capacitors2. for AC load line:-open all the Dc sourcesshort all the capacitors.
A typical AC waveform is symmetrical about a zero crossing point. You can bias the AC with DC such that the AC waveform is symmetrical about the DC voltage.
The difference AC and DC grounding is that AC is alternate current and DC is direct current. Grounding for both AC and DC is the same.
Ac/dc
AC/DC are from Sydney, Australia.
AC means alternating current DC means direct current there is no polarity reversal
AC/DC of coarse! I don't actually know. I just like AC/DC
DC Motor works on DC source and AC motor works on AC source