0
White is neutral in home wiring. Red is sometimes used in 3-way switches and dimmer applications, so it is likely red is hot in your application if it pertains to home wiring. The term positive would just apply to DC wiring since AC goes positive and negative. For example your car battery has Red as Positive and Black as Negative.
What else can I help you with?
Difference between relay and solid state relay?
All solid state relays are relays, but not all relays are solid state relays. There are three basic kinds of (protective) relays I know of: electromechanical (rely on induced voltages and currents to spin disks or energize solenoids), solid state (built with solid state parts - basically prerequisites to microprocessors), and microprocessor based relays (fancy computers).
How can you prevent the buildup of static electricity while fueling your vessel?
Maintain solid contact between the tank and the spout.
True or false stranded wire has a slightly smaller diameter than solid wire?
They should be the same but have different purposes. Stranded wire will flex easier than solid wire. And if one strand breaks there are sufficient numbers of other strands to continue the electrical current. When a solid wire breaks all connection is lost.
What type cable is less affected by the skin affect?
A: braided B: Solid C: Standed
Why don't we use one piece for transformer core?
If, by 'one piece', you mean solid -as opposed to laminated- then the answer is that a solid core will have significantly-higher eddy current (circulating current) losses than a solid core.
How do you tell a positive speaker wire from a negative speaker wire?
The positive speaker wire is a solid color, your negative wire should have a stripe on it.
What is the International color code for DC wiring?
"What is the International color code for DC wiring?" "What is the International color code for DC wiring?" "What is the International color code for DC wiring?" "What is the International color code for DC wiring?"
Would you wear a solid tie with a pin stripe shirt?
A solid tie would stand out over a pin stripe shirt.
What is location of 1 ball during break?
The one ball is placed at the front of the triangle. Then the balls alternate between stripe and solid around the outside. The smaller triangle inside the larger one will have the 8 ball at the head, with a stripe and solid behind.
What are the car stereo wiring color codes for pioneer ke 350?
Yellow - Constant 12 Volt (battery) Red - Accesory 12 volt (switched) only 12 volts when car in accesory or on position Black - Ground (chasis) White/white with black stripe - Front left speaker (black stripe is negative polarity) Gray/Gray with black stripe - Front right speaker (stripe negative) Green/green w/ black - rear left purple/purple w/ black - rear right solid blue - power anteanna (not all have this wire) blue w white stripe - remote turn on (used to turn amplifier on or power anteanna) yellow w/ black stripe - mute (for cellphone handsfree kit) Hope u like it!
When should a street be double stripe vs single stripe?
This has nothing to do with Tigers, or Army Chevrons. The traffic laws are as follows- Double Solid stripe- No Passing from Lane to Lane. Single broken stripe on one side- passing permitted on side that has broken stripe. (the other being solid) that is the traffic law regarding single and double pavement stripes in New Jersey. Obviously, there is normally no passing allowed on bridges or tunnels- and a triangular pennant shaped sign indicating ( No Passing) is used in areas where the solid stripe-broken stripe scheme is impractical- as perhaps tunnels and bridges. On deck!
Which wire is hot black with a white stripe or solid black?
The normal practice is for the black (or at least darker) wire to be hot. However, given the consequences of guessing wrong, they should be tested and both wires should be treated as "hot" until you find out differently.
As a poet Whitman died?
with a solid positive reputation
Rear speaker wire which is the positive in a impala ss 1994?
It will be the wire without the black line on it. Usualy the black line on a solid color will mean negative (-)
When playing pool if you sink two solids and a stripe on the break then go for solid but sink a stripe what happens?
On the break if you make a solid AND a stripe then technically it is still an open table. (meaning you can make any of them in) whichever is made in the second shot as long as it isn't both kinds again then the one you make is what your ball type is.
Does anything tattoo over black?
I'm not totally positive about this, but the last time I was getting ink, my artist said that you can tattoo white over black if its solid. Haven't tested it, but that's just an idea!
Wiring diagram clarion DRB2475?
Pinouts for Clarion DRB247516-pin wiring harness connector (12 pins hot)2 rows of 8 pinsLooking at back of unit, Left to Right, top row:Gray Stripe, RF Spkr -Gray Solid, RF Spkr +Violet Stripe, RR Spkr -Violet Solid, RR Spkr +Blue = power on to aux equip - amp, equalizer (has 5A inline fuse)Red = ignition acces. 12v+unusedunusedLeft to Right, Bottom row:White Stripe, LF Spkr -White Solid, LF Spkr +Green Stripe, LR Spkr -Green Solid, LR Spkr +BlacK = groundYellow = always on 12v+ (5A inline fuse) direct to batteryunusedunusedNotes:stripes are negativeGray = Right Front = RFWhite = Left Front = LFViolet = Right Rear = RRGreen = Left Rear = LRThis would be easier with a diagram, but this answer won't accept one.Good luck.
