hinders flow of current
Which is true of a series circuit that has two resistors?A.The resistors are on different branches of the circuit.B.Neither resistor has current flowing through it.C.One resistor has no voltage across it.D.Both resistors have current flowing through them.
True
if not disconnected you will measure the resistance of the circuit in parallel with the resistor.
There is no relation between the resistor's ohms value and its size. The power of the resistor can be seen by its size. If the power is too small, the resistor can be destroyed.
The current would be about 20 volts.
Which is true of a series circuit that has two resistors?A.The resistors are on different branches of the circuit.B.Neither resistor has current flowing through it.C.One resistor has no voltage across it.D.Both resistors have current flowing through them.
Greater value resistor will absorb more voltage than smaller value. The more voltage absorb with same value current flow, the larger body mass resistor will require. Body size depends on type of resistor (material resistor is made of).
Rubber is generally regarded as an insulator. A resistor is generally regarded as something that resists current but allows some current to pass. Rubber could be considered a resistor with infinite resistance but even that is not entirely true so rubber is usually excluded from the category of resistors.
True. When two resistors of equal value are connected in parallel, the total power dissipated by the circuit is indeed the sum of the power dissipated by each resistor. Since they have the same resistance and are subjected to the same voltage, each resistor will dissipate the same amount of power, and their combined power will equal twice that of one resistor.
True
yes, a variable resistor
First you need to know the value of the resistor. Follow the link for a handy resistor calculator After determining the value of your resistor simply test the resistor with an ohmmeter to see if it is at true value. General use should be within + or - 5%
Otis F. Boykin invented the wire precision resistor and the electrical resistor.
A non-ohmic resistor doesn't have a constant resistance. A ohmic resistor has a constant resistance.
A cement resistor is typically used as a power resistor (a resistor whose power rating is greater than 1 W).
Resistor value is defined by the Resistance the resistor offers in Kilo ohms/ohms value given by color codes on the resistor.
The Cable is the Resistor ! Its a Resistor-Cable ! Greets from the Lake of Constance/Germany !