Ohm's Law.
voltage
U = RxI so 11x20=220 volts
Ok so if you have to take the 5 amperes and multuply them by the 22 ohm resistance giving you the answer of 110 5 * 22 = 110 volts
Wind resistance doesn't exist The correct term is Air resistance, which is the force that pushes against an object while travelling. For example, air resistance constantly pushes against a car whilst it is moving. This is because a car has to 'split' the air to travel through it. Air resistance can be decreased by making the object (for example a car) more aerodynamic like an F-1 racer. Aerodynamic help to channel the air around the object and allowing it to push through the air easier. I can't go in-depth as it can get quite complicated, but I hope this helps anyway. == ==
Push-To-Make switch is a switch in which pressure is applied to the switch for it to let the electricl current flow through.
Ohms Law.
Your body resistance is high- hard to push electrons through.
voltage
'E' = electromotive force between 2 points, Volts 'I' = current from one of the points to the other, Amperes 'R' = resistance between the two points, Ohms Ohm's Law: E = I R I = E / R R = E / I
The resistance of a current is a measure of how difficult it is to push the electrons along.AnswerThere is no such thing as the 'resistance of a current'. Resistance is a characteristic of the material through which a current flows, not of the current itself.
Yes resistance would be a push force.
Resistance doesn't "use" either. Resistance is the division of voltage by current. It can be though of as a measure of how hard it is to push electrons through a substance.
A: 18volts / 3ohms = 6amps
Yes resistance would be a push force.
Consider resistance to be like effort needed to push water through a pipe. If you have a longer pipe, you need to put in more effort to push the water through, as it has further to go. Also skinnier pipes, and pipes with more obstructions also require more effort, so have a higher resistance.
You would feel resistance as you push the plunger due to the pressure it's creating. Once you overcome the resistance, you may feel a sudden release or movement as the plunger moves through the medium it's interacting with.
Voltage provides the "pressure" to push current "flow" through the circuit resistance.