If you are refering to a wall receptacle, the one on the right is the hot side. The left side is the neutral and it's slot is larger that the hot one. The U shaped on the bottom is for the ground pin of the plug.
On a 240 volt outlet, such as a dryer outlet: G is Ground, W is Neutral, X and Y are the two Hot legs.
On a 3 wire plug (NEMA 5 configuration, 125v 2 pole 3 wire grounding) the narrow blade is the "hot" lead, the wide blade is the neutral lead, and the U shaped prong is the equipment grounding conductor (EGC). Most 2+G non-metallic-cables (NMC) are color coded for Black = "hot", White = neutral, and Bare = EGC
A NEMA 5-20 plug is a standard 3 prong plug. It wires the same as a NEMA 5-15 plug (Ground wire to the "D" contact, Hot to vertical terminal and neutral to the horizontal terminal (with the Ground terminal either at the top or bottom)).A 5-20P plug has the neutral blade rotated 90°. The 5-20R receptacle usually has a T-shaped neutral hole, to accept both 5-15P and 5-20P plugs.
In the US the larger prong is Nuetral and the smaller is Live or Positive.
On a 240 volt outlet, such as a dryer outlet: G is Ground, W is Neutral, X and Y are the two Hot legs.
A polarized plug can only fit together in one direction. This is to prevent reverse polarity in the device you are plugging in.
The smaller prong on a plug is typically considered to be hot.
US dryers commonly use a 3-prong or 4-prong plug. The 3-prong plug has two flat blades (hot) and a L-shaped prong (neutral), while the 4-prong plug has two flat blades (hot), a round prong (neutral), and a half-round prong (ground). It's important to match the plug with the corresponding outlet for safety and proper functionality.
No, the wide prong is neutral it is the white wire. The narrow prong is hot it is the black wire. The round prong (in a 3 wire plug) is safety ground it is the green wire.
The designations of a three-prong plug are typically "hot," "neutral," and "ground." The hot wire carries the electrical current, the neutral wire completes the circuit, and the ground wire provides a path to the ground in case of a fault to prevent electric shock.
No you can not you will need to replace the plug with a 4 prong the same as the style of your oven and change your breaker to the correct Amp for your style of 4 prong plug
Ground wire
Yes, there are stove plug adapters available that can convert a 4-prong outlet to a 3-prong outlet.
The difference is safety. Any appliance or equipment that has metal parts that may be touched by the user will usually have 3 prongs because this provides for safety if those metal parts become energized. Exceptions would be "double insulated" items, such as many power tools, and items without exposed metal parts.
Not in itself. Do not plug another three prong plug in the outlet until the broken prong (round-ish) is removed from the outlet. The third prong (round-ish) on a three prong plug is the ground. It does not carry any power.Correction"It's the power return"
The reason might be a voltage or amperage mismatch between the two devices. Plugs and receptacles are matched sets depending on the voltage and the amperage of the devices. The configurations are done in this manor to prevent the wrong voltages being applied to wrong plug in equipment.
Need to know the amperage rating of the plug or the NEMA configuration of the plug and receptacle