answersLogoWhite

0

What else can I help you with?

Continue Learning about Electrical Engineering

What damages a rectifier?

Rectifiers are electrical parts, all electrical parts are rated for 3 things. 1) voltage 2) current 3) temperature Exceed any of these things and the electrical part will fail.


What are the basic parts of a simple electric circuits?

The three essential parts of any electrical circuit are: a power source (like a battery or generator), a load(like a light bulb or motor) and connectors (wires) to join them together.A fourth part, that is always a very important thing to have in most circuits, is a control device such as a switch, circuit breaker or fuse.


What is the purpose of an electrical tie breaker?

An electrical tie breaker is designed to protect electrical circuits from overloads and short circuits by interrupting the flow of electricity in case of faults. It ensures the safety of electrical systems and prevents potential damage to equipment and hazards such as fires. Additionally, tie breakers help maintain system stability by allowing the safe disconnection of parts of the network while maintaining power to other areas.


What is a mounting bracket?

A mounting bracket is a support device used to securely attach or hold an object, such as a light fixture, sign, or equipment, to a wall, ceiling, pole, or other surface.


What is a vapor tight fixture light?

It is a fixture that has a hermetical seal that keeps fumes and vapours from the electrical parts of the fixture. A good example of a vapour tight fixture is one that is used in paint spray booths. These types of fixtures are not to be confused with explosion proof fixtures which are in a different category altogether.

Related Questions

What is a light receptor?

A light receptor is a specialized cell or molecule that detects light stimuli and converts them into electrical signals that can be interpreted by the brain or other parts of the nervous system. In animals, light receptors are found in the eyes and play a crucial role in vision.


What parts of the light bulb were invented by Thomas Edison?

shape and that vacuum has to be used.


What are all the parts on a circuit board?

to assemble a circuit you just need to connect one end of a wire to the battery and the other to the light bulb ( could be another electrical device) now take an other wire and connect on end of it to the other side of the battery and the other to the other side of the light bulb( or an other electrical device. if your circuit is including a switch this is how you do it: ( you will need three wires for this circuit if you have one electrical device) connect one end of the wire to the battery and the other to the switch.Grab another wire and attach one end of it on the other side of the switch and the other to the electrical device (light bulb). Grab another wire and attach one end of it to the other side of battery and the other to the other side of your electrical device. And there you have it how to assemble a circuit


Do you have to ground exterior electrical post lights?

All metal parts of an electrical installation should be grounded. The would include outside light posts.


Why is the battery light on in my 1997 Toyota Camry?

The light in on because there is a problem with the electrical system. More than likely the alternator has failed. Most auto parts stores will check your electrical system for free.


What is kind of electric light?

Lightning is an electrical current that starts in clouds due to differences in electrical charges between parts of the clouds.


Does 1999 Saturn SC1 have a fuse for dome light and map lights?

Yes, all electrical parts in the vehicle are fused.


What other part did did Eli Whitney invent for the muskets?

He invented interchangeable parts


When was interchangeable parts invented?

the interchangeable parts where invented in 1798.


What are the parts of an electric bulb?

The parts of a light bulb are the glass envelope, mixture of inert gases at a lower pressure, and a screw cap. Inside of the light bulb is the coiled tungsten filament, support wires, glass fuse enclosure, connecting wires, and the electrical contact.


When was the refraction of light invented?

If was never invented. It was discovered. Newton did the formal work, but parts were known many thousands of years earlier (the Babylonians had mirrors and magnifying glasses).


Who were some people who invented technology?

Otis invented important parts of an elevator, making them safe.Land invented a very useful film for polarizing light waves.Daimler made important contributions to the motor car.