0
What else can I help you with?
Secretary of PNP?
who is the scretary of bid
What is rx-quality?
Rx level is the measure of power what we get at the recieving end.Rx level value is different for every different applicatione.g In microwave link it is between -30dBm to -60dBm n this is planned accordingly.whereas the RSL of a GSM handset of the GSM antenna (BTS End) is between -70dBm to -120 dBm or something like this value where the GSM system operatesthis value is the measure of power so, this value should be there or this is the operating ranges in different different applications.another word is Rx Quality this is the other name for BER i.e Bit Error Rate, so BER defines the Rx quality. it means that lower the %ge of BER better the Rx quality.thanx
Who is the current secretary of the DBM?
hudas
Who is the present secretary of DBM of the Philippines?
The Present secretary of the Philippine Department of Budget and Management (DBM) is Sec. Rolando G. Andaya, Jr.
What is the Middle name of florencio butch abad the DBM Secretary?
Barsana
Who is the current DBM secretary of the Philippines?
Abad i dont know the last name though
Convert 2.2 V pp to dBm?
20 dbm
Is DBM real?
Yes, DBM (data base management) is real.
What is the dBm value of a 10milliwatt signal?
P(dBm) = 10log10(10mW) = 10dBm
What is 75 dBm converted into dBW?
dBw=dBm-30 then 75-30=45 dBw dBw=dBm-30 then 75-30=45 dBw dBw=dBm-30 then 75-30=45 dBw
Where can one learn about DBM outplacement?
DBM outplacement information can be located directly on the DBM website. You can also locate this type of information on career transition websites as well.
What is mic and line level audio?
Mic level is -56 to -40 dbm. Line level is either -10 dbm or 4 dbm. You need a preamp to amplify a microphone to line level.
What is the loss if input is -5 dbm and output is -10 dbm?
Gain = Pout - Pin = -10dBm - (-5dBm) = -5dB
How 1mWatt equals 0dBm?
The decibel-milliwatt (dBm) scale is a logarithmic unit used to express power levels relative to 1 milliwatt (mW). Specifically, 0 dBm is defined as the power level equal to 1 mW. Therefore, when the power is exactly 1 mW, it translates to 0 dBm, as dBm is calculated using the formula ( \text{dBm} = 10 \times \log_{10}(\text{Power in mW}) ); thus, ( \log_{10}(1) = 0 ), resulting in 0 dBm.
