Mic level is -56 to -40 dbm. Line level is either -10 dbm or 4 dbm. You need a preamp to amplify a microphone to line level.
I strip the audio from DVD with a DVD Audio Ripper,
The MIC50 and MIC90 is a way of recording antibiotic sensitivities more conviniently, especially if your trying to report MICs of a large group or organisms. The MIC 50 would show that 50% of the organisms lie below this MIC, e.g an MIC50 of 32 shows that 50% of your organisms have an MIC of 32 less and the same principal for the MIC90. This just shows that 90% of your organisms lie below that MIC eg. MIC 90 of 128 means 90% of your organisms are at 128 or below so this represents the majority or average.
If you have a mic and speakers and sound comes out of the speakers and that is picked up by the mic and fed in to the speakers again and amplified by the amplifier comes out of the speaker again and picked up by the mic the process repeat its self over and over again and that whats makes the screacing noise that is feedback and it can blow your speakers up.
It depends upon the dimensions that you are working with.In one dimension all level are mundane and all lines are simply referred to as 'the line'.In two dimensions it depends upon which direction you proceed from a reference point. If the point is contained within the boundary of the line then all parts of the line are 'the out-line'. If the point is exterior to the line boundary then all parts of the line are 'the in-line'.In three dimensions there are nine variations to proceed from a point of reference and are (now-a-days) referred to in ordered of their level hierarchy.out out outout out inout in outin out outout in inin out inin in outin in inmundane -- unity with the point of reference.
Separate plugs for Mic and audio.
To boost the low level of mic input to line level for mixing.
There are basically three levels in audio. Microphone level which is the very low level put out by a microphone. Speaker level is the very high level put out by a amplifier that feeds a speaker. Line level is the middle level that is used to feed audio between components. Consumer audio devices usually use a RCA connector for line level.
If the tv has audio inputs it can be done. A preamp is needed only if you want to plug a mic. into a LINE IN connector.
Green audio out. Blue audio in. Red mic in.
as i understand you question u want to record audio in you computer without mic. you can use stereo mix option
usually the standard jacks for aircrafts have a mono phone and microphone jacks. the phone is easily identified because the opening is bigger. One receives a phone and phone low audio, while the other takes the mic audio and mic key to the audio panel selector.
Yes it is just a preamp you need an audio interface that will connect the preamp to the audio interface into the computer and obviously a Mic in front of it
No. MIDI is a data port, not audio port.
use the mic input on your computer and change the setting to line input instead of internal mic or w.e or with a male to male audio cable you can get an adapter and plug an electric guitar in and play live and record .. depends what instruments .. all possible though
no it has a built in mic
To change clipping in audio level you will have to do a few steps. First chick on the small icon in the lower left of the timeline that looks like a mountain, then click on the purple audio level line and drag it down to lower the level and if your wanting to increase it just drag it up.