0
Why analog circuit has much noise than digital circuit?
Sujeetsinghking
Data regeneration is not possible in analog circuits.Signals has degeneration and distortion so it causes noise.But in digital circuit signals are quantizated and regenerated even if they had corruption.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the difference between analog and digital data transmission?
This is essentially the same question as the difference between analog and digital. With analog electronics a voltage is used to represent (or to be an analogy for) some physical attribute in the real world. So for an analog transmission, at its simplest, a sound signal (say) is converted to a voltage, the voltage sent down a cable, then at the other end the voltage converted back into sound with a loudspeaker. With a digital system, the physicial attribute is measured and sent as a series of numbers, the numbers being converted to binary. For a digital transmission, the sound signal is converted to a series of numbers, sent as binary, and converted back to a sound signal at the other end. The advantages of digital is that it makes multiplexing much easier - making it easier to put many signals down the same physical cable. It also makes compressing the signal much easier - this is particularly effective for digital television transmission; 30-40 digital channels can be sent over the same bandwidth as 4 or 5 uncompressed analog channels. Also, digital is much more resiliant against noise - the digital receiver has to make a decision about each bit - is it there or not; noise can be pretty extreme before this becomes impossible, with analog, once noise is added its very difficult to remove it. The historical disadvantage of digital is that digital encoding and decoding equipment was expensive compared with the analog. Over the last 10 years or so, digital electronics has become much cheaper and more powerful.
Why are digital system capable of accuracy than analog system?
1.having low noise as compare to analog. 2.using TDMA Iinstead of FDMA techniques used in analog. 3.in digital signals regenrative repeaters are used at every regeneration point of the signals so low loss of signals are there as compare to analog signals
Why are analog meters used in vehicles?
If you are cruising down the freeway, you can get about the same information on, say, your speed, if you look at an analog meter as a digital one. But if you are braking and your speed is changing, a digital meter will be "fluttering" as it continuously gets a new reading to post, and it won't be able to tell you how fast you're going. (This had to do with the way the sensors "sample" the speed to display it.) In the analog meter, the needle will be falling as you slow down, and the human brain has a better "grasp" of the "meaning" of the falling needle than it has of blinking numbers on a display. Certainly as the needle on an analog meter passes a specific mile-per-hour marker, you can see how fast you were going. But it is the value of the moving needle in the analog meter and the ability of the brain to "understand" it that makes it so much more effective than a digital display.
What are the advantages of digital system over an analog system?
In general there is no direct advantage or disadvantage for either of the two technologies. There are various criterias that may result in an advantage for one of both in each specific design. All items below have to be considered during the design of (a part of) a device: * Is the electronic interfacing to analog or digital sensors / actuators / communication networks * What is the power budget * Is there a need for reconfiguring the design * What are the costs of the components * What are the skills of the available developers? Are they hardware or software minded? * What are the data throughput requirements? Those questions do influence the design. If this question refers to an already made design, the following items are important: * Digital systems which are processing analog data need to convert those signals. The conversion is the critical part. * Does the converter takes enough samples with a high enough resolution to be able to re-generate the original signal? * does the conversion use a lossy or loss-less compression technique? * Has the signal to be distributed over long distances, or to a lot of different places? Digital system easily integrate error detection and correction, where analog systems have more difficulties to do this. * Is a high quality required? You can see that it is strongly related to the target application, thus you have to make your own decision which is best in your situation. SPEED
What are the applications of Butterworth filters?
especially it is very much useful in high quality AUDIO applications because of its flat response in both pass band and stop band where as chebyshev will be useful in signal monitoring applications where the phase is not important criterialow pass filters are used to filter noise from a circuit .noise is a high freequncy signal, when passed through a low pass filter most of the noise is removed and aclear sound is produced
Why digital signals are more noise free than analog signals?
Digital signals are "forced" to be either 1 or 0, whereas analog signals are not. This means that a signal of 0.8 will be pushed to 1 in a digital signal and will remain 0.8 in an analog signal, and 0.2 will be 0 digital and 0.2 analog. This means that in order to overwhelm a digital signal the noise must do much more work to be effective. digital signal have only two states analog have infinite states therefore more susceptible to noise
Why does signal processing in digital mode?
You can process signals with many analog circuits. The advantage of Digital Signal Processing, is that once you have represented the signal in a digital form, you can use a computer program to perform much more complex operations on the signal than could be accomplished with an analog circuit. Such examples are noise cancellation and compression. With the recent advent of 'Digital TV', the stations can fit more information into a smaller 'bandwidth' through compression (much as you might ZIP a large file before emailing it), allowing for delivery of more content.
What is the difference between analog and digital data transmission?
This is essentially the same question as the difference between analog and digital. With analog electronics a voltage is used to represent (or to be an analogy for) some physical attribute in the real world. So for an analog transmission, at its simplest, a sound signal (say) is converted to a voltage, the voltage sent down a cable, then at the other end the voltage converted back into sound with a loudspeaker. With a digital system, the physicial attribute is measured and sent as a series of numbers, the numbers being converted to binary. For a digital transmission, the sound signal is converted to a series of numbers, sent as binary, and converted back to a sound signal at the other end. The advantages of digital is that it makes multiplexing much easier - making it easier to put many signals down the same physical cable. It also makes compressing the signal much easier - this is particularly effective for digital television transmission; 30-40 digital channels can be sent over the same bandwidth as 4 or 5 uncompressed analog channels. Also, digital is much more resiliant against noise - the digital receiver has to make a decision about each bit - is it there or not; noise can be pretty extreme before this becomes impossible, with analog, once noise is added its very difficult to remove it. The historical disadvantage of digital is that digital encoding and decoding equipment was expensive compared with the analog. Over the last 10 years or so, digital electronics has become much cheaper and more powerful.
Which device is used to convert digital signals to analog signals or analog signals to digital signals?
The set top box that your provider gives you is what converts the Digital signal to the analog signal. The digital signal is compressed at the provider and sent to the end user. The "tuner" (which can be built into a tv, a set top box or a cable card) Then decompresses the digital signal and converts it into an analog signal. There is much more to this did not know how technical you wanted your answer.
Why are digital system capable of accuracy than analog system?
1.having low noise as compare to analog. 2.using TDMA Iinstead of FDMA techniques used in analog. 3.in digital signals regenrative repeaters are used at every regeneration point of the signals so low loss of signals are there as compare to analog signals
What is the difference between digital and analogs?
In chemistry, analog is a compound with a molecular structure closely similar to another. Analog is also relating to or using signals or info represented by a continuously variable physical quantity such as spatial position or voltage. Analog is often contrasted (opposite) of DIGITAL --like a clock showing the time represented by "hands" instead of being Displayed DIGITS.
What is the difference between digital and analog electromagnetic signals?
There is no modulation of a Digital Circuit.Modulation is placing information onto an analog circuit to transport thatinformation to a distant location to be decoded/demodulated.Having said that, you can modulate a digital signal in dozens of ways,(Modem) and you can also modulate an analog signal dozens of ways(AM Radio Station, CB Radio, Walkie Talkie, FM Rock Station).NoteWhat this question may really be asking about is something like:"What are the differences between using an analog signal and a digital signal when you want to encode some information for transmission?"so that has now been posted as a separate question.
How are digital signals in radio broadcast converted to analog signals inside digital transmission equipment before sending the signals to the antenna for transmission?
The digital signals is not converted BACK to analog! it is transmitted in digital form and the receiver is converting it back to analog to drive the speakers. The signal from the microphone is converted from analog to digital with an A/D converter chip, digital signals consist of pulses of different lengths that is switching the transmitter on and off in about the same way as the old Morse code transmissions but at a much higher rate (millions of times higher)
Diffrence between analog and digital computer?
An analog computer is any computer that represents its data in the form of continuously variable signals instead of the discontinuous encoded symbols used by digital computers.
Can you convert a TV to digital TV?
It is not possible to convert an analog television to a digital television. However, by using a digital set top receiver, it is possible to receive digital signals and deliver them as an analog signal to an analog television. Digital receivers are not expensive, starting at around $25 in US and £20 in the UK. They will allow all terrestrial channels to be received in the same way that a digital television will. Cable and satellite receivers can also receive digital signals and will provide an analog output that can be used with older televisions. With these options, there is no need to replace analog televisions right away. Remember that analog only televisions will not be HD so don't expect a sudden increase in picture quality when the digital receivers are used.
Why must sound card and video on a PC be converted from analog to digital?
Primarily because digital systems are more accurate. Additionally, digital technology is replacing older systems with modern devices because digital devices are often much smaller, and require less maintenance.
How do I test a capacitor with a multimeter?
This is nearly impossible unless the digital multimeter has either:a built in capacitance meter functionan analog bargraphIt was actually much easier to do on the old style cheap analog multimeters with a needle using the ohms scale than it is on modern digital multimeters.
