Two bulbs in parallel are brighter than the same two bulbs in series, given the same potential voltage, because there is twice the available voltage to each bulb.
10
Do a google search for: 555 timer circuit You will find hundreds of circuits you can use.
the voltage intensifier circuit was invented by Stanley A Meyerand was used to fracture water. The circuit includes a secondary of a transformer, a positive and negative inductor, blocking diode and water capacitor. We still don't know exactly how to build one or how it works. Stanley took that to his grave, but many people such as my self are working on it.
No. you need that regulator to accuratly measure the current or you will destroy the laser diode . Blue laser Diodes will Blow on regular 3 volt batteries because a regular battery (aaa) supplies way more current to the diodes than it needs thus burning it out .Most AA batteries can produce 1 amp or more . (Poof)
An electric circuit is a closed loop that allows a flow of electrons to begin from a source of the electrons and return to the same source. Some of the energy carried by the current from the source may or may not be released to perform useful work. Because of the resistance of the materials in the circuit, some of the energy carried by the current is always lost as heat emitted from the circuit into the surrounding environment. The flow of electrons around the closed loop is called an electric current. The source of the electrons must be a chemical battery or a mechanical generator which produces a potential difference, also known as a voltage.
You do not build a series circuit in your home. The only series circuits are the circuits that go through circuit breakers, light switches, and relays. Electrical and electronic devices use internal series circuits but those are the only ones people build. No one builds series circuits for house wiring. Electrical outlets are connected with parallel wiring.
It is possible but it is too involved to explain here. You would need a printed circuit board and a schematic to build what you want.
I have never heard of an electrical term "build" in an electrical circuit.
yes! connect all the bulbs in parallel.. i.e. battery positive terminal will be tied to one side terminals of bulb and other terminal to the other. but it will result in less power delivered.. and fast battery usage..
The battery is connected. In vehicles the power (electrons) comes from the negative terminal in the battery and your body provided the positive (magnectic inductance) to complete circuit probably from static electricity you had build up.
In a DC circuit, one alternate to the rheostat for controlling battery voltage is a voltage regulator. You could build a linear regulator, but you need to consider the power that might be dissipated - this would be the same amount of power dissipated by the rheostat. You could also build a switching regulator - this would be more complex, but it could be more efficient because the dissipation across the regulator would be less.
BATTERY + - | | | | | ----------------------LED-----------LED---------LED---------LED------------ | | | | | | | | | | | | | | | | | | ------------------------------------------------------------------------------------------ No the above is a series circuit it would also need a ballast resistor so not to cook your LED's. This is a parallel circuit- +---------- ---- ---- ---- | | | | LED LED LED LED | | | | - ---------- ---- ---- ---- It is best to give each LED its own resistor.(not shown) For some reason when I click save it removes the spaces, ASCII characters have never been good for representing circuit diagrams.
The things needed to build a circuit are:Circuit elements like resistor capacitors, inductors etcConnectors (cables)A source
It would be possible but you would need to build one involving many many lemons in series (to get up to 12 volts) and then many banks of these in parallel (to deliver the power).
Three main components that are needed to build a circuit will be a power source. This supplies the circuit with a voltage to operate. A load to make the current flow through the circuit, and conductors to join these two devices together to carry the current.
There are many different ways to make a simple circuit for a water sensor, websites such as 'instructables' 'clear rice education' 'electronics tutorials' 'build circuit' and 'bright hub engineering' are some of the best sites to look at each has instructions to suit different levels of ability
iron nickel or cobalt