0
What else can I help you with?
Advantages of hybrid modulation over digital modulation?
presentation of analog digital hybrid modulation
What is positive and negative modulation?
in order to transmit the video signal amplitude modulation is used. the composite video signal has distinct polarity of black and white levels in the picture.1.positive modulation :- in this type of modulation, increase of brightness toward white causes increase in carrier amplitude peak white has 100% modulation while black and sync level have lower and minimum modulation respectively2.negative modulation :-in this type of modulation,the sync tip level are at 100%.blanking level correspond to black is at 75%and increase in brightness toward white causes decrease in carrier amplitudeNegative modulation is preferred over positive modulation because impulse interference is difficult to deal with and random increase in signal is similar to existing sync pulse.these interference result in generation of black spot and white blobs.
What are the advantages of digital modulation over analog modulation?
1)digital modulation can easily detect and correct the noise. where as analog modulation has little complexity 2)security is more in digital modulation 3)digital modulated signal can traverse a long distance compared to analog modulation
What is the advantage of ppm over pwm and Pam?
PPM is a type of pulse modulation where messages are sent using single pulses. PWM is a type of modulation which conforms to the pulse. PAM is a type of modulation in which the information is encoded into a series of pulses.
Why is modulation necessary before multiplexing?
modulation means transmitting the signal which is to be transmitted along with the carrier wave, then at the receiver it is separated from the carrier and demodulated. So modulation is needed so as to transmit the signal over long distances with higher accuracy. Hence it is required before multiplexing.
Advantages of hybrid modulation over digital modulation?
presentation of analog digital hybrid modulation
What are the advantages frequency modulation amplitude modulation?
Frequency modulation have some advantages over amplitude modulation, FM is not sensitive to the amplitude noise, and have high efficient use of transmitted power
What is positive and negative modulation?
in order to transmit the video signal amplitude modulation is used. the composite video signal has distinct polarity of black and white levels in the picture.1.positive modulation :- in this type of modulation, increase of brightness toward white causes increase in carrier amplitude peak white has 100% modulation while black and sync level have lower and minimum modulation respectively2.negative modulation :-in this type of modulation,the sync tip level are at 100%.blanking level correspond to black is at 75%and increase in brightness toward white causes decrease in carrier amplitudeNegative modulation is preferred over positive modulation because impulse interference is difficult to deal with and random increase in signal is similar to existing sync pulse.these interference result in generation of black spot and white blobs.
Which of the following modulation is non linear?
frequency modulation is non linear due to cross over term.
What are the advantages of digital modulation over analog modulation?
1)digital modulation can easily detect and correct the noise. where as analog modulation has little complexity 2)security is more in digital modulation 3)digital modulated signal can traverse a long distance compared to analog modulation
What are the Advantage of digital modulation over analog modulation?
1)digital modulation can easily detect and correct the noise. where as analog modulation has little complexity 2)security is more in digital modulation 3)digital modulated signal can traverse a long distance compared to analog modulation
What do you think is a carrier's maximum modulation index without over-modulation?
The maximum modulation index for a carrier signal without resulting in over-modulation typically depends on the modulation scheme being used. For standard amplitude modulation (AM), the maximum modulation index is generally 1, meaning the peak envelope power of the modulated signal should not exceed the carrier power. In frequency modulation (FM), the modulation index can be higher, but it should still be kept within limits defined by the system to avoid distortion. Ultimately, the precise value can vary based on specific application requirements and the desired quality of the transmitted signal.
Why is PC preferred over laptop?
if you mean why is a desktop preferred over a laptop. then i would answer that they aren't and that laptops are preferred because of their convenience
What is light modulation?
Light modulation refers to the process of varying a light signal's properties, such as its intensity, frequency, or phase, to encode information. This technique is widely used in telecommunications, such as in fiber optic communication, where data is transmitted over long distances. Modulation allows for efficient transmission and improved signal quality by adapting the light signal to different conditions and requirements. Common methods of light modulation include amplitude modulation (AM), frequency modulation (FM), and phase modulation (PM).
What is the advantage of ppm over pwm and Pam?
PPM is a type of pulse modulation where messages are sent using single pulses. PWM is a type of modulation which conforms to the pulse. PAM is a type of modulation in which the information is encoded into a series of pulses.
What refers to waves continuously varying in strength and quality?
This refers to the concept of modulation, where a carrier wave's strength or characteristics are modified to convey information. Modulation techniques include amplitude modulation (AM), frequency modulation (FM), and phase modulation (PM). These techniques are commonly used in telecommunications for transmitting signals over long distances.
Show you diploma 3rd semesters all new sample question papers of MSBTE board Mumbai?
what are the advantages of amplitude modulation over frequency modulation?
