Because, the commutator segments are used for converting AC to DC.
The Armature(or rotor) is a electromagnet inside a motor and alters the magnetic field inside the motor when it rotates. In DC motors it is connected to a Commutator. In AC induction motors the armature isn't connected to a power source.
Direct current or DC electric motors work for situations where speed needs to be controlled. DC motors have a stable and continuous current. DC motors were the first and earliest motors used. They were found, however, to not be as good at producing power over long lengths. Electric companies found using DC motors to generate electric did not work because the power was lost as the electric was transmitted. Brush DC motors use rings that conduct the current and form the magnetic drive that powers the rotor. Brushless DC motors use a switch to produce the magnetic drive that powers the rotor. Direct current motors are often found in appliances around the home. Alternating current or AC electric motors are used differently based on what type of AC motor it is. Single phase AC motors are known as general purpose motors. They work well in many different situations. These AC motors work great for systems that are hard to start because they need a lot of power up front. Three phase, also called polyphase, AC motors are usually found in industrial settings. These motors also have high starting power built transmit lower levels of overall power. AC power gets its name from the fact that it alternates in power. The amount of power given off by an AC motor is determined by the amount of power needed to operate the system. garyDC motors are of mainly 3 types.series motors, shunt motors, and compound motors. DC motors are mainly used where high torque is required from less speed (rpm),and a constant rpm can be maintained.Used mainly in : lathe ,drill machines, grinding machines, compressors and so on.Ac machines have less expenses. Used widely because Ac is more popular. They have less torque on slow speeds.Used on cooling fans, water pumps etc.
DC motors generally use commutators. Also some single phase AC motors use commutators. They are the type which which have their field windings connected in series with their armatures and they can typically be found in home vacuum cleaners, DIY-type ac electric drills, etc.
There are quite a few types of AC motors that are used in everyday common applications. The AC motor is generally used more so than a DC motor. Some of the more well known and practical uses for a AC motor include, water pump motors, robot arm motors and various other uses that make the life of the common man easier.
Ac motor have slip ring, to remove the slip ring,connected to the commutator its a dc motor.
The commutator is used to convert the AC to DC
The commutator is used to convert the AC to DC
An AC motor is an electric motor that runs on alternating current, like household electricity, as opposed to a DC motor that runs on direct current from a battery. Most AC motors work from the mains supply, which has a frequency of 50Hz in the UK and 60Hz in the USA. Other types are available that work like stepper motors and need a specialist supply to run them.
Yes
R. H. Dijken has written: 'Optimization of small AC series commutator motors'
In motors Electric current is supplied to the commutator through the .......
no unless some commutator like device is used
AC current is used in motors.
The Armature(or rotor) is a electromagnet inside a motor and alters the magnetic field inside the motor when it rotates. In DC motors it is connected to a Commutator. In AC induction motors the armature isn't connected to a power source.
Commutator is a device in a motor through which supply is fed.
AC commutator motors, like comparable DC motors, have higher starting torque and higher speed than AC induction motors. The series motor operates well above the synchronous speed of a conventional AC motor. AC commutator motors may be either single-phase or poly-phase. The single-phase AC version suffers a double line frequency torque pulsation, not present in poly-phase motor. Since a commutator motor can operate at much higher speed than an induction motor, it can output more power than a similar size induction motor. However commutator motors are not as maintenance free as induction motors, due to brush and commutator wear.
The split rings cause the direction of the magnetic field in the armature to change direction as the motor rotates. If this didn't happen the motor would not rotate. Slip rings can be used for an AC motor which causes the direction of the magnetic field to change with the AC waveform.