0
the three legs in a transistor are known as E B and C. They stand for Emitter, Base and collector.
Two of them are input and one is an output. so you have two going into the component and one that goes out.
hope this helps i am also doing an assignment on this and found this out.
What else can I help you with?
When 2 transistors are connected what is it called?
if connected so as to compound the gain ,then DARLING PAIR
What do you call the vacuum tubes used in transistor radios?
You don't, there aren't any. However some radios in the early 1950s did use both vacuum tubes and transistors. This was because early junction transistors were too slow to operate at RF so vacuum tubes were used in the RF and IF sections. These radios were called hybrid radios because they used both vacuum tubes and transistors.
Does a refrigerator have transistors?
A fridge may or may not have a few transistors in it, these are electrical components that would probably be part of the control circuitry. Transistors used to be very common components of most electrical appliances. The cooling process of the fridge has nothing to do with transistors and is handled by a compressor and a heat exchange pump
Why FET is called as a unipolar transistor?
The FET is a semiconductor device with the output current controlled by an electric field. Since the current is carried predominantly by one type of carriers, the FET is known as a unipolar transistor.
How many transistors are in an AND gate?
6
What is the center section of a transistor called?
in bipolar transistors it is called the basein field effect transistors it is called the channel
Why transistors are called transistors?
Previous answer "TRANSISTORS are current controlled voltage soruce" Nup, current-controlled current controller. Named as a contraction of TRANSference resISTOR.
What is the main work of transistors in an electronic circuit?
The main use of transistors in electronic circuits is as switches and memory storage
If an animal has 6 legs and 3 body parts what it is called?
An animal with 6 legs and 3 body parts is typically called an insect. Insects have three main body parts: head, thorax, and abdomen, and most have 6 legs.
What are the switches that make up a microprocessor called?
chips
What are reindeer legs called?
legs
What are birds legs called?
Well the legs are called legs but their toes are called Talons which as people we call claws.hope this answered your question.
Are 3 butterfly legs legs and are 3 butterfly legs arms?
I would say, "No" because they use all of their legs as legs to walk on. They don't use 3 legs to pick things up and move thing. So all their legs are legs.
What are the legs called on a Praying Mantis?
legs
2 legs sat on 3 legs eating 1 leg 4 legs jumped on 2 legs 2 legs got mad at 4 legs threw 3 legs at 4 legs?
A man (2 legs) sat on three legs (a 3 legged stool), 4 legs (dog) jumped on 2 legs (man), 2 legs (man) got mad and threw 3 legs (stool) at 4 legs (dog). There are many variations of this.
When 2 transistors are connected what is it called?
if connected so as to compound the gain ,then DARLING PAIR
A stand with three legs is called?
A stand with three legs called atripod
