answersLogoWhite

0

What else can I help you with?

Continue Learning about Electrical Engineering

What is ACCU in air conditioning design?

ACCU - Air-Cooled Condensing Units Air-cooled condensing units covers products that are specifically designed to provide cooling to other equipment and systems that incorporate evaporators (and associated expansion valve control systems). Air-cooled condensing units are factory-assembled units that consist of an air-cooled condenser, one or more compressors, and interconnecting pipe work. They may include liquid receivers, filter driers, oil separators, shut off valves and related controls, and a weatherproof housing.


What is a water cooled shunt?

A shunt is an electrical conductor joining points of a circuit, into or out of which current can be diverted. The water-cooled refers to the way it's kept cool, as insulation is not provided.


What must happen to the voltage and resistance for the circuit to get cold?

For a circuit to get cold, the voltage across the circuit must decrease, and the resistance within the circuit must increase. This decrease in voltage reduces the energy flowing through the circuit, while the increase in resistance limits the flow of current, resulting in less heat generation. By manipulating these two factors, the circuit can be cooled down effectively.


How do fuses differ from circuit breakers?

A fuse box is a box that holds fuses that once blown, they have to be replaced. A circuit breaker will reset itself after it has cooled down. +++ NO: that is a thermal-overload protector. A circuit breaker is not normally auto-reclosing (except for certain types in power-stations). It has to be re-set manually, so fails safely: it stays off until you have traced and corrected the fault,or disconnected the guilty appliance, that caused it to release. A fuse is just a thin wire filament that melts (fuses) if the current drawn exceeds its limit.


What is the technical difference between oil cooled transformer air cooled transformer?

The basic difference between the air cooled transformer and oil immersed transormer is: If the heat generated in the transformer winding is capable of being swapped by the sarrounding ambient air without causing any problem to the performance of the transformer then its normally reffered as Naturally Air Cooled transformer or simply air cooled transformer. However when the capacity of the transformer increases, the heat generated in the winding of the transformer is more and the ambient air normally is inadequate to cool the windings and maintain the performance of the transformer. Its because of this reason the transformer windings are submerged in an oil tank. It has been observed that the hydrogen ions present in oil help to maintain the temprature of the winding of the transformer and thus overall performance of transformer.

Related Questions

When steam is cooled in the air you can see it condensing What process is that?

When steam is cooled in the air, you can see it condensing into a mist. This process is called condensation.


What are formed from cooled water vapor condensing?

fog


What are the two methods for rejecting heat from refrigerated cases?

The two methods for rejecting heat from refrigerated cases are Air cooled condensing units and Closed circuit coolers.


When steam is cooled in the air you can see it condensing what is that called?

When steam is cooled in the air it creates water vapor. This water vapor comes together to create clouds and fog.


What is ACCU in air conditioning design?

ACCU - Air-Cooled Condensing Units Air-cooled condensing units covers products that are specifically designed to provide cooling to other equipment and systems that incorporate evaporators (and associated expansion valve control systems). Air-cooled condensing units are factory-assembled units that consist of an air-cooled condenser, one or more compressors, and interconnecting pipe work. They may include liquid receivers, filter driers, oil separators, shut off valves and related controls, and a weatherproof housing.


Why does vw air cooled engine quit when the brake is applied?

There's a short to ground in the brake light circuit. When you step on the brakes, it diverts all the power in the car to ground, and stops the engine.


What is sub-cooled liquid?

LIQUID COOLER THAN THE CONDENSING SATURATION TEMPERATURE (125 degree Fahrenheit ) IS CALLED SUBCOOLED LIQUID


What is the meaning of fcu and accu regarding air con?

FCU means FAN COIL UNIT and ACCU stands for AIR COOLED CONDENSING UNIT


What is the primary water source from water cooled recovery unit condensing coils?

it uses a loop undergroung, better know as a municipal waer supply


Why is tar heated and not cooled before applied to a roof?

Tar is heated so it can stick to what ever it is going on. If it was cooled it would not stick right.


How does a water-cooled reflux condenser function in a distillation process?

A water-cooled reflux condenser functions in a distillation process by cooling and condensing the vaporized substances back into liquid form. This helps separate and purify the components of the mixture being distilled.


Name three criteria of a good location for an air-cooled condensing unit?

1.code requirements 2.will not make noise 3. place with low shrubs