MOSFET is Metal Oxide Semiconductor Field Effect Transistor.
IGFET Insulated Gate Field Effect Transistor.
But these expressions are practically synonyms.
FET is a field effect transistor, abbreviated to FET. There are two basic types of FET: a junction FET abbreviated to JFET and an insulated gate FET , abbreviated to IGFET. The most common type of IGFET is a metal-oxide silicon FET, Known as a MOSFET. Modern microprocessors may contain tens of millions of MOSFETs.
MOSFET is an acronym standing for Metal Oxide Semiconductor Field Effect Transistor.
what is a mosfet amplifier
conductiong channels
MOSFET has high input impedance and offer input signal isolation from the circuit
Both are the same!
It depends on: 1. technology, whether it's a JFET, enhancement-mode IGFET/MOSFET or depletion-mode IGFET/MOSFET, and 2. polarity, whether it's an N type or P type. More info needed for this one.
FET is a field effect transistor, abbreviated to FET. There are two basic types of FET: a junction FET abbreviated to JFET and an insulated gate FET , abbreviated to IGFET. The most common type of IGFET is a metal-oxide silicon FET, Known as a MOSFET. Modern microprocessors may contain tens of millions of MOSFETs.
MOSFET is an acronym standing for Metal Oxide Semiconductor Field Effect Transistor.
what is a mosfet amplifier
It depends. A depletion MOSFET can be used as an ehancemnet MOSFET when it is operated as an analog amplifier. However, a depletion MOSFET can't replace an enhancement MOSFET when it is operated as a digital switch. When a depletion MOSFET is used as a digital switch, since the junction between source terminal and substrate must be reverse biased, the voltage of the source terminal of an N typde transistor must be tied to Vdd, and it is completely opposite to an enhancement MOSFET. When a depletion MOSFET is used as an analog amplifer, the source terminal and the substrate are both at the same potential, just like an enhancement MOSFET.
Depletion mode MOSFET is normally on device --vlsijp
mosfet base power inverter of advantages and disaadvantages
A transistor (bipolar junction transistor BJT) will only conduct in ONE DIRECTION. And the voltage drop is not Ohmic - it is *NOT* strictly related to current flow. If you're referring to a Field-Effect Transitor (JFET, IGFET, MOSFET, etc), then the device may be able to be used in a bidirectional circuit. But the question stated "transistor", which is understood to be a BJT.
A transistor (bipolar junction transistor BJT) will only conduct in ONE DIRECTION. And the voltage drop is not Ohmic - it is *NOT* strictly related to current flow. If you're referring to a Field-Effect Transitor (JFET, IGFET, MOSFET, etc), then the device may be able to be used in a bidirectional circuit. But the question stated "transistor", which is understood to be a BJT.
The terminals on a MOSFET are called the "Source", "Drain", and "Gate". Just as with a bipolar junction transistor (BJT) the direction of current flow will be based on the doping configuration of the semiconductor. In a MOSFET, the doping configuration can be either n-channel or p-channel, but with MOSFETS, they also come in a "normally on" or "normally off" configuration, which is specified by being either "depletion mode" or "enhancement mode", respectively.
2-3v