how to get theoretical voltage from given resistors and given experimental voltages
...what readings? current? voltage? power? lux?
In the CEC (Canadian Electrical Code) voltage drop for feeders is stated in rule 8-102. Voltage drop in an installation shall not exceed 3% in a feeder or branch circuit. This percentage may differ in the NEC (National Electrical Code).
An e only(enhancement) ÊMOSFET is off at zero gate-source voltage. Meanwhile, a de (depletion enhancement)ÊMOSFET is on at zero gate-source voltage.
Power cords have different voltage rate, example 7A/125V cord can hold much voltage than 3A/125V. The higher the current flow can melt the lower type of power cord that is dangerous and can cause fire. Base on my knowledge there are different types of power cords according to the ampere and voltage needed.
at the time of decreasing lamp voltage as the temperature is already high the gas in the lamp is already in ionized state leading to different resistance ,but when increasing voltage the gas is not in ionized state it ready to ionize ,so there is slightly variation in resistance . :)
The theoretical value is based on calculations and predictions made prior to the experiment, taking into consideration ideal conditions, assumptions, and factors. The experimental value is obtained through actual measurements during the experiment, which can be influenced by various sources of error such as equipment limitations, environmental factors, human error, or unknown variables. Discrepancies between theoretical and experimental values are common and can provide valuable insights into the accuracy and limitations of the theoretical model.
Theoretical Approach is looking at the data and determining an outcome. Experimental Approach is performing the procedure and recording the actual oucome, which can differ from the theory or theoretical approach.
Provided that the correct model is used, the theoretical probability is correct. The experimental probability tends towards the theoretical value as the number of trials increases.Provided that the correct model is used, the theoretical probability is correct. The experimental probability tends towards the theoretical value as the number of trials increases.Provided that the correct model is used, the theoretical probability is correct. The experimental probability tends towards the theoretical value as the number of trials increases.Provided that the correct model is used, the theoretical probability is correct. The experimental probability tends towards the theoretical value as the number of trials increases.
Theoretical values of equivalent resistance can differ from experimental values due to several factors, including the tolerance and imperfections in the resistors used, variations in temperature affecting resistance, and the limitations of measurement techniques. Additionally, real circuits may have parasitic elements like capacitance and inductance that are not accounted for in theoretical calculations. These discrepancies highlight the importance of considering practical conditions when analyzing electrical circuits.
The theoretical yield is the amount of product that we predict will be obtained, calculated from the eqquation. The actual yield is the amount of product that is actually obtained at the end of the procedure.
A yield is received after a person does the experiment. Second, they can never be same values. We can only get close to theoretical yield but never attain similar values under normal experimental conditions.
While the distillation is going on ,at 94.6% ethanol-water mixture forms an azeotrope which hampers further distillation.So ethanol cannot be made 100% pure.But concentration of ethanol can be increased by breaking the azeotrope by addition of benzene in large amount.
If you are referring to the voltage after the rectifiers in a powersupply, it is due to the voltage drop across the rectifiers.
The theoretical probability of event X is the proportion of event X out of N trials as N tends to infinity. Thus, if you flip a coin many times, you get closer and closer to 1/2 being H and 1/2 being T. This differs from experiment because all experiments take place with a finite number of trials.
A control sample is the experiment under regular conditions. An experimental sample is the experiment in which different variables are changed.
altough voltage follower circuit provides output voltage which is in phase to input voltage as in noninverting amplifier but in unamplified form.
A voltage amplifier does not have to supply significant current bur a power amplifier does.