because its possible only where pole changing arrangements are given and pole changed motor draws more current then its actual pole which damages its windings.
The flux control method is the convectional and the non-convectional method of speed control of an induction motor.
I need the answer of this question plz!!
because dc motor is a powerful & dangerous motor it is akiller
speed of a dc motor can be varied by mainly two methods:- 1)field control method 2)armature control method further , field control method can be divided in 3 parts:- 1)field rhestat control method---speed variation is acomplished by means of a variable resistance inserted in series with shunt field 2)reluctance control method---by changing the reluctance of magnetic circuit by choosing right material.. 3) field voltage control method-requires variable field voltage supply. and armature control method can be divided in 3 parts :- 1)armature resistance control---variable resisitance connected in series with armature 2)shunted armature control. 3)armature voltage control. ------------mrityunjay pandey (kiit university ,btech 2nd year)
There are two ways of changing the speed of AC motors,by altering the frequency or the number of poles in the motor. An increase in frequency of the supply voltage to the motor will cause it's speed to increase while reducing the frequency will causes the motor speed to drop. This is the method exploited by Variable Speed/Frequency Drive. The second method of changing the number of motor's stator poles is the difficult. The manufacture must design the motor such that the number of the motor's pole in operation can be increased or reduced. Increasing the number of poles increases the stator flux density which decreases the speed. Decreasing the number of poles does the opposite. This method is typically found in two speed motors and it's rarely used compared to VSDs.
The flux control method is the convectional and the non-convectional method of speed control of an induction motor.
you can control the speed of a motor by changing frequency, increase or decrease the field winding or by voltage regulation. in these method you can controle the speed of athree phese motor SANDEEP SARKAR
How many methods can be used to control the speed of Single Phase Induction Motor? 1.injecting emf method 2.by frequency control method 3.induced voltage method
I need the answer of this question plz!!
It is used for sensorless motor control. With vf speed control u can control speed of any induction motor.
Open ended induction motor - i assume you are talking about split phase induction motor. With these motors old style speed controlling method using external resistors can be used. However this is now obsolete.
It is used for sensorless motor control. With vf speed control u can control speed of any induction motor.
because dc motor is a powerful & dangerous motor it is akiller
induction motor has two control system one is stator control another rotor control And it comes under the category of asynchronous motors. The term induction is because the rotor of an a.c motor does not receive the electric power through conduction but by induction same as the secondary of the transformer receives the power from primary. And so an induction motor can also be called as a rotating transformer i.e. one in which primary is stationary and secondary is free to rotate.
by changing the ryb phase altornat e.g. rby ,bry , yrb we change the direction of the induction motor .. . ..
Yes the Induction motor works on Electromagnetic induction principle.
Induction motor is an AC electric motor which uses electromagnetic induction to induce the electric current in the rotor to produce torque.