ohm's measure resistance, the more ohm's the more resistance the less voltage
The low voltage needs to be stated of the 20 watt lamps.
big particles=low porosity small particles=high porosity
To covert a high frequency to a low one, we use flip-flops.
Impedance of water is the density of water times the sound velocity in water ANSWER: Pure water has a high resistivity. An ohmmeter i a good way to check for quality of water. If resistance is low it means that it is has other material floating in there.
On a multimeter, a high resistance would indicate a high Ohmic value and a low resistance would indicate a low Ohmic value. Specific values would be relative to device you are measuring.
Charcoal has a low density because it is porous and lightweight.
high
Quite low density: 0.968 g·cm−3
low
Diffusion.
Gasses have an incredibly low density, less than a liquid or a solid.
High volume and low mass result in low density because density is calculated by dividing mass by volume. When the mass is low compared to the volume, the density will also be low because there is less mass per unit of volume.
Low.
1. It has more gravitational force exerted on other objects 2. It holds more energy than smaller objects
You are asking for comparatives. Each state can be any when compared to another state except the extremes. Liquid or gas either lower or higher depending on what you compare it to.
LDPE is Low Density PolyEthylene.HDPE is High Density PolyEthylene.
As temperature increases, density decreases.