A single-phase induction motor has a main winding and a starting winding. When the motor has run up to normal speed the starting winding can be switched out, but for small motors this is not usually worth the trouble.
Yes, the induction motor has a rotor winding. It is usually one turn, shorted. This is how the magnetic fields generated in the stator induce a current in the rotor, which subsequently generates a torque from the opposing magnetic fields, stator to rotor.
Only Stator winding is similar in both the cases.
Single phase motor will not start automatically unless it has a start and run winding.
The synchronous motor is made self starting by providing a special winding on the rotor poles, known as damper winding or squirrel cage winding. AC supply given to the stator produces a rotating magnetic field which causes the rotor to rotate, therefore, in the beginning synchronous motor provided with damper winding starts as a squirrel cage induction motor. The exciter moves along the rotor. When the motor attains about 95%of synchronous speed, the rotor winding is connected to exciter terminals and the rotor is magnetically locked by the rotating field of the stator and the motor runs as a synchronous motor. While starting a synchronous motor, the field winding must be shorted through a suitable resistance so that the induced voltage is distributed throughout the whole winding and no part is subjected to the high voltage induced in the entire winding.
In dc motors, the electric power is conducted directly to the armature (i.e., rotating part) through brushes & commutator. Hence, in this sense a dc motor can be called as a Conduction motor. However, in ac motors, the rotor does not receive any electric power by conduction but by induction in exactly the same way as the secondary of a two winding transformer receives its power from the primary. That is why such motors are called as Induction motors. An induction motor can be treated as a rotating transformer i.e., one in which primary winding is stationary but secondary is free to rotate.
A single-phase induction motor has a main winding and a starting winding. When the motor has run up to normal speed the starting winding can be switched out, but for small motors this is not usually worth the trouble.
A single-phase induction motor has a main winding and a starting winding. When the motor has run up to normal speed the starting winding can be switched out, but for small motors this is not usually worth the trouble.
If there is an extra winding called the "damper winding" in addition to the field winding.Then the synchronous motor will operate as a squirrel cage induction motor.Whats is a damper winding ?A damper winding is made up of copper bars which are placed in the slots in the pole faces of the rotor.These are short circuited with the help of end rings in a squirrel cage induction motor.
Standard induction motor has a closed squirrel cage rotor, where as open ended induction motor has split phase rotor.
Is there a question here.
Like transformer induction motor has stator winding(Primary winding) and rotor winding(Secondary winding) separated by an airgap.Rotor winding(generally Al bars) are short circuited at the end to produce torque for the rotation.Hence the name short circuited transformer.
To start an induction motor we have to excite field. The excitation is done by connecting the DC supply to the field winding's.
Squirrel cage induction motors.
A single phase induction motor has two sets of coils and a centrifugal start switch. The start winding is in series with the start switch. The start winding provides a rotating magnetic field in one direction enabling the motor to start. The motor can be reversed by reversing the connections of either the start winding or the run winding but not both.
No.
Open ended induction motor - i assume you are talking about split phase induction motor. With these motors old style speed controlling method using external resistors can be used. However this is now obsolete.
Yes, the induction motor has a rotor winding. It is usually one turn, shorted. This is how the magnetic fields generated in the stator induce a current in the rotor, which subsequently generates a torque from the opposing magnetic fields, stator to rotor.