This question does not make sense.
There is no difference they perform the same functions.
The active region of a transistor is when the transistor has sufficient base current to turn the transistor on and for a larger current to flow from emitter to collector. This is the region where the transistor is on and fully operating.
Power transistor can conduct large amount of currents through it, more than small signal transistor. power transistor has a vertical structure and small signal transistor has horizontal structure.In power transistor quasi saturation region is present which is absent in the small signal transistor. In power transistor there is a inculsion of drift layer which is not there in the small signal transistor. Power dissipation is less in power transistor and it is more in small signal transistor. b.v.polytechnic,vasai pushkar vaity.
The input current of transistor is approximately equal to output current .Suppose in common base configuration the emmiter current is approximately equal to collector current if neglect the very small value of bae current.Even though the input resistance is not equal to output resistance,the currents are same ,so we can reliase that the transistor transfers resistance to get same currents at both ends.
what is the equivalent transistor for c1027
Yes, the are different names for the same thing.
187 will have the same number of factors no matter what you do to it.
no
A: The transistor has not changed practically the same size what has changed is the packaging and the technology of mapping substrates
The product of the GCF and LCM of 111 and 187 is the same as the product of 111 and 187: 20757
The same things a transistor is used for.
yup, both equal 187
The same as in 1 trillion - 12.
A: Actually a transistor have two diode with the base mas a common terminal. the characteristics of these tow diodes however are not the same as a common diode
Yes, they are the same guns.
49 percent of 187 = 91.6349% of 187= 49% * 187= 0.49 * 187= 91.63
A: The characteristic will be the same as DTL RTL TTL the logic will not change but the transfer function for each family is certainly different