0
What else can I help you with?
What are the torque settings for vauxall astra 1.7 dti?
torque settings for a vauxhall 1.7 td clinder head
Torque wrench setting for crank pulley on a astra 1.6 sxi?
if any1 knows the answer, PLEASE let me know!! thanx
What is the torque setting for a 2005 astra front wheel bearing?
The torque setting for the front wheel bearing on a 2005 Astra typically ranges from 100 to 130 Nm (Newton meters) for the hub nut. It's essential to consult the vehicle's service manual for the exact specification, as it may vary based on the specific model and engine type. Always use a torque wrench to ensure proper tightening to avoid damage or failure.
What are the torque settings on a 2002 1.6 vauxhall astra club for the crankshaft pulley bolt?
The torque setting for the crankshaft pulley bolt on a 2002 Vauxhall Astra 1.6 is typically around 110 Nm (Newton-meters) or 81 lb-ft. It's important to follow a proper tightening sequence and to use a torque wrench for accuracy. Always refer to the vehicle's service manual for specific guidelines, as specifications may vary slightly depending on the engine variant.
What are the torque wrench settings for a 1.7 tdi mk4 Astra?
i have also lost the piece of paper, need the answer asap as im working on the car now. thank you
How do you remove the cigarette lighter in a Suzuki alto?
how do I change cigarette liter for vauxall astra sport year 2000
What is the torque setting for vauxhall astra 1999 2.0 16v sri flywheel bolts?
65 + 30° + 15° 6) you should use new bolts and locking compound
What is the head bolt torque for a Opel Astra 1.6 16v C16SEL engine?
For this one you'll need a torque wrench and an angle gauge. Hope you are familiar with these. The values are 25Nm+600+600+600. These are from General Motors workshop manuals so I trust them 101%. G.Ikenye
What is the big end and main bearing torque wrench settings for a vauxhall astra 1.7cdti 2005?
Big end 1, 25nm 2, 100 + 15 deg Main 1, 44nm 2, 88nm :)
Where is the fuse for the indicators on a vauxall astra?
the fuse for indicators on (my Vauxhall astra 1.4 mk 3 ls is no 28 on the fuse board ,drivers side behind rectangular panel ,it is the last fuse 15a at the bottom right on fuse board.
What is the torque wrench settings for a vauxhall astra 1.4 1992?
STAGE 1 - 25NM STAGE 2 +60 DEGREES STAGE 3 +60 DEGREES STAGE 4 +60 DEGREES ALWAYS USE NEW BOLTS
What is the torque wrench settigs for a opel astra 00?
All bolts in any vehicle have specific torque ratings. -There are usually at least 35-50 specified torques for all the bolts. -You haven't said WHICH bolts you want the torque value for, so we can't answer. -Your best bet is to buy the specific manual for your car where all the torques will be written in one page.
