Density of asphalt is depending on several specifications but overall it'll be between 1,010 and 1,300 kg/m3. So this is between 0.99 and 0.77 m3/1000kg
Asphaltic concrete is about 2,240 kg/m3 (0.446 m3/1000kg)
I use a conversion factor of 152 pcf (pounds per cubic foot) for asphalt, as a general rule of thumb. For a CY, multiply by 27, to get 4,104 pcy (pounds per cubic yard) of asphalt.
The number of wheelbarrows in 1 cubic meter of 19mm stone depends on the size of the wheelbarrow. A standard wheelbarrow typically holds about 0.1 cubic meters of material. Therefore, you would need approximately 10 wheelbarrows to transport 1 cubic meter of 19mm stone. However, this may vary slightly based on the exact dimensions of the wheelbarrow and the compaction of the stone.
The weight of coarse aggregate required to fill one cubic meter depends on its density, which typically ranges from 1,500 to 2,500 kilograms per cubic meter. Therefore, one cubic meter of coarse aggregate generally weighs between 1.5 to 2.5 tonnes. For example, if using a density of 2,000 kg/m³, one cubic meter would equal 2 tonnes. Always check the specific density of the material being used for accurate calculations.
1 Meter = 3.2808399 ft to be exact=]
100 TONS
would there not be 6 linear meters in 1 cubic meter?? 6 sides on the cubic meter??
Linear meters (Length) can not be converted to cubic meters (Volume)
100000000000 cubic meters
This cannot be done. A cubic meter is a volume and a square meter is an area.
4 meter
one thousandth cubic meter (1 cubic meter = 1000 cubic liter)
5.4 cubic meters
0.000237 cubic meter.
0.000185 cubic meter.
1 cubic yard is about 0.7646 cubic meters.
0.02832 cubic meters.
Since 1 cm = 0.01 meter, 1 cubic cm = 0.013 cubic meter. (1/1,000,000 of a cubic meter)