answersLogoWhite

0

no because when you close it, the circuit is complete so it lets the electrons pass through

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Engineering

Is an open switch in an electrical circuit to prevent current flow?

Yes, an open switch breaks the circuit and prevents electricity flowing through. A closed switch on the other hand completes the circuit and in turn helps electricity travel through the circuit.


How can you stop the flow of the current around a circurt?

Open the circuit with a switch or contacts.


True or false A device that is used to open the circuit when the current flow is to great is a disconnect switch?

False. A device that is used to open the circuit when the current flow is too great is a circuit breaker or fuse.A disconnect switch is a manual device that isolates or turns off the load.


A potential path for the flow of electricity with at least one gap in the path that prevents this flow. The gap is usually the result of an open switch.?

In an electrical circuit, the flow of electricity is typically continuous when a closed switch connects the power source to the load. However, if the switch is open, it creates a gap in the circuit, interrupting the flow of electrons. This open switch prevents current from reaching the load, effectively halting any electrical activity in that part of the circuit until the switch is closed again. As a result, the device or component intended to operate remains inactive.


How does a switch control an electric device?

A switch basically represents a gap in the electric circuit. Electric current can pass through a circuit only if it is complete. An incomplete circuit can never pass a current through it. When the switch is in the 'off' position, the circuit has a break (gap) in it. When you put the switch in 'on' position, the circuit wire join and the circuit gets completed.

Related Questions

What a switch does in an electricial circut?

A switch in an electrical circuit is a device that can open or close the circuit, allowing or preventing the flow of electricity. When the switch is closed, it completes the circuit, allowing the electricity to flow, while when it is open, it interrupts the flow of electricity. This allows users to control the flow of electricity to a particular device or component in the circuit.


If a switch is said to be open will a curcuit work?

A circuit will not work if a switch is open, be because it is not allowing the electricity to flow. Where as if it was closed it would give the electricity a sealed off path to flow through.


What does a switch do in a circuit and how does it affect the flow of electricity?

A switch in a circuit controls the flow of electricity by opening or closing the circuit. When the switch is closed, it allows electricity to flow through the circuit, completing the path for the current. When the switch is open, it interrupts the flow of electricity, breaking the circuit and stopping the current from moving.


What does a switch do to effect a series circuit?

For an electrical circuit to keep going, it cannot be interrupted. When the switch is adjusted, the electrical flow is interrupted. Move the switch again and the flow is restored. Without a switch a circuit is no longer considered a complete circuit. Simple fifth grade science.


How does a switch work in a circuit to control the flow of electricity?

A switch in a circuit works by opening or closing a pathway for electricity to flow. When the switch is closed, it completes the circuit and allows electricity to flow through. When the switch is open, it breaks the circuit and stops the flow of electricity. This control of the flow of electricity allows the switch to turn devices on and off in a circuit.


What position does the switch have to be in for a circuit to work?

The switch needs to be in the "on" position for the circuit to work, allowing the flow of electricity through the circuit. In the "off" position, the switch breaks the circuit, stopping the flow of electricity.


How does a switch control the flow of electricity?

When the switch is open, the circuit is not a complete circuit. Electricity needs a complete circuit of conductive material. The switch breaks the circuit causing the flow of electricity to be disrupted. When you close the switch, a full circuit is restored thus restoring the flow of electricity.


What does the switch do in a circuit and how does it affect the flow of electricity?

A switch in a circuit controls the flow of electricity by opening or closing the circuit. When the switch is closed, it allows electricity to flow through the circuit, completing the path for the current. When the switch is open, it interrupts the flow of electricity, breaking the circuit and stopping the current from moving through.


What is the purpose of a switch in an electric circuit and how does it function to control the flow of electricity?

The purpose of a switch in an electric circuit is to control the flow of electricity by opening or closing the circuit. When the switch is closed, it allows electricity to flow through the circuit, completing the path for the current. When the switch is open, it breaks the circuit, stopping the flow of electricity. This on/off functionality of the switch helps to control the flow of electricity in the circuit.


How do switches affect open and closed circuits?

Switches control the flow of electric current in a circuit. In an open circuit, the switch is off, interrupting the flow of current. When the switch is closed in a closed circuit, it allows the current to flow continuously through the circuit.


What is the difference between open and close switch?

In an open circuit no cuttent can flow so the switch would have to be in the off position- the switch is open and not completing the circuit. A closed circuit is one where current can flow all the way through, the switch would have to on and therefore closed.


What does a switch do in an electric circuit and how does it affect the flow of electricity?

A switch in an electric circuit controls the flow of electricity by opening or closing the circuit. When the switch is closed, it allows electricity to flow through the circuit, completing the path for the current. When the switch is open, it interrupts the flow of electricity, breaking the circuit and stopping the current from moving through.