Current I=V0/R as per OHMs law: V=IR
Charge on capacitor Q=CV=It
The same as the time constant of a 2.7 microfarad capacitor and a 33 ohm resistor connected in series.
A circuit in which elements are connected in series.For example in RLC series circuit resistor,inductor and capacitor are connected in series.
Since they're connected in parallel directly across the source, the voltages across both componentsare equal, and are equal to the source, i.e. 120 v DC.
capacitor acts as resistor because it has some resistace alos.
The initial condition is the voltage and/or current existing at the time a mathematical solution begins. Example: what happens when a resistor is connected across a capacitor? well, you say that at t=0 the resistor is connected, then after that the voltage across the capacitor is v0.exp(-t/RC), where v0 is the starting voltage, t is the time, R is the resistance and C is the capacitance. This simple solution needs only one initial condition which is the starting voltage v0 across the capacitor. Linear differential equations are common in electrical engineering and a complete solution of one (such as the example) always requires one or more initial conditions.
When it is connected to resistor
The same as the time constant of a 2.7 microfarad capacitor and a 33 ohm resistor connected in series.
A transistor acts like a resistor when Gate is connected to Source.
When a capacitor and resistor are connected in parallel in a circuit, the behavior changes in that the capacitor stores and releases electrical energy while the resistor controls the flow of current. This combination can affect the overall impedance and time constant of the circuit, leading to changes in the voltage and current characteristics.
That would be done by a resistor connected between the two plates.
A circuit in which elements are connected in series.For example in RLC series circuit resistor,inductor and capacitor are connected in series.
When a resistor is connected to a capacitor with dielectric material between the plates, the capacitor discharges through the resistor. The dielectric material remains an insulator and does not directly create a path for electron flow. Instead, the charges on the plates induce an electric field in the dielectric, which stores energy until the capacitor discharges through the resistor, allowing the charges to flow back and neutralize.
Since they're connected in parallel directly across the source, the voltages across both componentsare equal, and are equal to the source, i.e. 120 v DC.
need to use BC107 transistor which has three terminals base, collector and emitter........ collector is connected with 6.8k ohm resistor other end of this resistor is connected with 3.7 ohm resistor and it is connected to the base of the transistor which is already connected to a capacitor of 1 micro F and a positive of function generator......and in the output side i.e in the collector and emitter side connect the 1 micro F capacitor and 10 kohm resistor and connect the CRO...... then other to the ground.......
capacitor acts as resistor because it has some resistace alos.
To add a capacitor and resistor in parallel, simply connect one terminal of the capacitor to one terminal of the resistor, and then connect the other terminal of the capacitor to the other terminal of the resistor. This creates a parallel circuit where both components share the same voltage.
resistor