Yes you can. There is a special concrete formula made by sackrete that you just add water to the concrete after pouring it in a hole.
how much does it cost to form and pour concrete in Mobile, AL
about how much to pour a concrete slaba 12 x 14'
No. Concrete won't bond to concrete. It will end up cracking.
What you need to do first is to check if you have that room near the threshold of the door for that extra concrete(which is minimum of 3.5" inches) then you need to remove the top surface of the old concrete to be rough surface don't break too much just about an 1"wash clean and let it dry and only then to install the new concrete.
Yes
No, you cannot dry pour concrete without adding water. Water is necessary to activate the chemical reaction that causes the concrete to harden and set properly.
I’ve worked on a few small- to mid-scale projects where dry pour concrete was considered, and honestly, it depends on the situation. Dry pour concrete is basically when the dry mix is placed in a hole or formwork and then water is added on top to let it seep in. It can work in simple applications like fence posts or mailboxes because those don’t bear a lot of structural load. But when you’re talking about serious construction projects, dry pour isn’t the best choice. Properly mixed and poured concrete is always stronger and more reliable because the water-to-cement ratio can be controlled. With dry pour, you risk weak spots, uneven curing, and cracks forming over time. If you’re thinking about something like Concrete Repairs Minchinbury, you’d definitely want to stick with properly mixed concrete. Repairs need to be solid and long-lasting, and that’s not something dry pour can really guarantee in a structural sense. I’d only ever use it for light-duty, non-structural fixes, but never for main construction or repair work.
To properly prepare and pour a dry pour concrete slab for a shed foundation, follow these steps: Clear and level the area where the slab will be poured. Install formwork to contain the concrete. Compact the soil and add a layer of gravel for drainage. Mix the dry concrete mix with water according to the manufacturer's instructions. Pour the concrete into the formwork, spreading it evenly. Use a screed board to level the concrete. Allow the concrete to cure and set before removing the formwork. Following these steps will help ensure a strong and stable foundation for your shed.
No, it is not recommended to pour concrete on wet ground as it can compromise the quality and strength of the concrete. The ground should be properly prepared and dry before pouring concrete to ensure a strong and durable foundation.
To fix a hole in concrete, you can use a concrete patching compound. Clean the area around the hole, apply the compound, and smooth it out with a trowel. Let it dry according to the manufacturer's instructions.
To replace a mailbox post in concrete, follow these steps: Dig out the old post and concrete base. Install a new post in the hole, making sure it is level. Mix and pour new concrete around the post, ensuring it is secure. Allow the concrete to dry and set before attaching the mailbox.
The recommended method for installing a mailbox concrete base is to dig a hole, pour concrete into the hole, insert a post anchor into the wet concrete, and allow it to set and cure before attaching the mailbox.
To fill a hole with concrete effectively, first clean the hole and remove any debris. Mix the concrete according to the instructions on the packaging. Pour the concrete into the hole, making sure it is evenly distributed. Use a trowel to smooth the surface and remove any air bubbles. Allow the concrete to cure for the recommended time before using the area.
To repair a concrete hole in a driveway, follow these steps: Clean the area thoroughly Fill the hole with a concrete patching compound Smooth the surface with a trowel Allow the patch to dry completely Seal the repaired area with a concrete sealer.
Yes.
To fill a hole in concrete effectively, start by cleaning the hole and removing any debris. Then, mix a concrete patching compound according to the manufacturer's instructions and fill the hole with the mixture. Use a trowel to smooth the surface and allow it to dry completely before finishing or painting.
To effectively fill a hole in a concrete slab, you can use a concrete patching compound. Clean the hole thoroughly, mix the compound according to the instructions, and fill the hole with the mixture. Smooth the surface and allow it to dry completely before walking or placing any weight on it.