A series DC motor can be thought of as having two components, the rotor and the stator. The rotor has windings which rotate and the stator's windings stay stationary. In a series DC motor these windings are connected in series. To make the motor turn backwards you must reverse the current through either the rotor or stator windings, but not both.
The split rings cause the direction of the magnetic field in the armature to change direction as the motor rotates. If this didn't happen the motor would not rotate. Slip rings can be used for an AC motor which causes the direction of the magnetic field to change with the AC waveform.
Reverse any two of the lead wires at the motor junction box.
AC
Reversing polarity is not possible with an ac motor. Some do have wiring that will allow you to change rotation. The type and model of the motor can tell you if it is reversible.
On an AC motor you basically vary the frequency on a DC you can vary the voltage.
DC motor: Switch your leads. AC single phase motor: Direction cannot be changed. The motor will run the same direction regardless of how your leads are terminated. AC 3 phase motor: Switch any two leads.
ac machines can run only in one direction but dc machines can run in both the directions depending upon the direction of current flow into it. If we change polarity of input supply we can reverse the direction of motion of dc machineCommentThe above answer isn't altogether true, as it's very easy to change the direction of an AC machine. For example, to change the direction of rotation of a three-phase induction motor, the motor controller interchanges two of the three line conductors.The main difference used to be that the speed of DC machines is easier to control, but that is a thing of the past thanks to developments in electronic motor controllers.
The direction of a singular phase induction ac motor can be reversed by switching the capacitor in relation with the motor windings. When started in the reverse direction, the motor will maintain the same torque level that it had in the forward direction.
The answer to that question is entirely dependent on the motor. Many motors have an access plate where the power feeds into the motor. Removing that plate often reveals a wiring diagram that shows how to change the wiring to reverse the motor direction. But most AC electric motors do not provide the option of reversing direction.
Type your answer here... how can you change an ac motor to a dc generator
The split rings cause the direction of the magnetic field in the armature to change direction as the motor rotates. If this didn't happen the motor would not rotate. Slip rings can be used for an AC motor which causes the direction of the magnetic field to change with the AC waveform.
Ac motor have slip ring, to remove the slip ring,connected to the commutator its a dc motor.
stepper motor :- motor used for controlling direction of movement of robotic arm dc motor :- motor used in cellphones as vibrators ac motor :- motor used in textile machinery
Reverse any two of the lead wires at the motor junction box.
yes.because the direction of motor is same in both half cycles
A device called a motor capacitor is used to change the rotation direction of a motor in a washing machine. By changing the connection of the capacitor, the motor's direction can be reversed to rotate in the opposite direction.
AC