0
What else can I help you with?
How do you drill a safe lock my digital safe has lost power and ive lost key?
Depending on the size and construction, I've found it easier to open with a 6 lb. maul/hammer and a crowbar. But if you must drill here are some ways. Get a diamond tipped drill bit, drill bit extension and learn the proper angle for drilling. There are some faster ways on the first link that accompanies this. Hire a Safe Technician to do the drilling as it's cheaper than having them open it other ways.
What is part of a door you can open with a key?
You can open a key lock on a door knob, or you can open a deadbolt lock on the door itself.
How do you open c language?
You cannot open (close, lock, etc) languages!
What Happens If you put Coke On a Clogged Drain?
If you have a clogged drain and you have coke in your house .. 1st Poured coke in the toilet than You wait 15 Minutes and Flush the Toilet and After that open The Toilet top part and it will look clean..
4 safety rules ofr the pillar drill?
-Tie long hair up in a bobble-Keep the clamp down on your work if it is small-When you have finished don't blow away the sawdust use a dust pan and brush-Never keep the safeguard open when using-Only 1 person uses the machine at a time
Replacement key for slot machine by heiwa?
Try contacting a locksmith. If you can't get the door open at all, they will have to drill out the lock and replace it.
How do I open 1972 nova trunk with broken lock?
Either drill lock out or try removing rear seat back for access
How do you remove the trunk lock of a 1971 Pontiac Ventura?
You have to open the trunk lid, under the lock on the inside you will find a screw, remove the screw and the lock retaining clip, pull the lock out. If you can not open the trunk lid, drill the lock center out, and you should be able to open with a screw driver.
How can you break into the trunk of a 1998 Mercedes?
drill the lock and push in, lift open the trunk door
How do you open sentury safe without key?
Firstly, is it yours? If not, then you can't. Contact the manufacturer and see if you can get a replacement key. If not, call a locksmith. They can usually pick the lock open. If not, they can also drill it open. If they won't drill it, look up instructions on how to drill out a lock. If that's not possible, see if it can be sawed open. If not, hire a company to blast it open. If all else fails, re-evaluate the value of the item inside the safe. Is it really that valuable?
How long to wait to open the can to avoid coke splash out after picking from vending machine?
After 1 minute
How can I open a locked glove box in a Crown Victoria?
Without a key or a lock smith the most common way is to drill the lock out. Start with a 1/4 bit and drill in the center of the key hole. Keep moving to larger bits till the lock tumblers break out, then you can install a new lock.
How can you open your transit bonnet the lock has collapsed?
all you can do is drill it out and use a grinder as well takes around a hour to do big job
How do you unlock a coke machine with a key?
After you've inserted the key, spin the cylinder counterclockwise until you can open the front.
How do you use the word dial in a sentence?
Dial the correct number to open the lock. There is a combination dial on the machine.
I have a 1993 mustang with a hatch back. I do not however have the key to open the trunk. I know that I may have to replace the lock but how do I go about getting the trunk initially opened to do so?
drill out the centre of the lock and then use a screwdriver like a key. once open you will be able to remove the old lock and replace it with a new one that has a key.
Does an open can of coke weigh the same as an unopened can of coke?
no
