A gas log can be installed in a regular fireplace, or in a prefab, but it should be done by an installer familiar with the process. Burning any fuel, including gas, uses up air, and produces products of combustion. Done badly, it could be very dangerous.
It is indeed difficult to install a ventless gas fireplace. Anytime you deal with gas you should call a professional.
It is not as bad as you think, the most difficult part is deciding whether to keep it as a gas fireplace or a wood burning fireplace with a gas lighter; so you can have both. Decide the gas to be used, Natural gas or LP (pretty much determined by what is already available) The fireplace itself needs little modification except the gas supply and available electrical circuit (depending what type/style gas fireplace you want.) If you decide on gas with artificial logs, then running black pipe to copper lines is all you need. If you are going to burn gas and use wood then run black pipe throughout (remember to use a cement product, for high heat, to seal any new whole in the fireplace.) Note: Either way you decide thoroughly clean the chimney and fireplace and inspect the doors, damper, flue, and look for cracks in the fireplace. I mention this because it is probably the last time you will need to do that. I have converted fireplaces in both ways; gas to wood burner and wood burner to gas. The insert is the biggest expense you will have, you can easily spend $600 on just those parts; not installed. And please don't forget to install and easily accessible gas shutoff valve.
Varies from make to make, model to model. You need to check with the company that made yours.
fireplace
Depends- some as "gas assist"- a woodburning fireplace with gas jets- you can use either. Some are gas only- never meant to burn wood. Which do you have?
To safely and effectively install an electric insert for your gas fireplace, it is recommended to hire a professional electrician or fireplace installer. They will ensure that the installation is done correctly and in compliance with all safety regulations. Attempting to install it yourself without proper knowledge and experience can be dangerous and may result in fire hazards or electrical issues.
first off you need to turn off the gas then, cap the gas line then remove the gas line and the vent pipes up in the chimney, then remove the insert or gas log, then install damper doors, put on a suitable door to the fireplace, and put a basket in the fireplace to hold the wood The above paragraph assumes that the fireplace was originally a wood burning fireplace that was retrofit to accommodate a gas fireplace insert and in that circumstance the information is accurate. However, if the fireplace was originally designed as a gas appliance it cannot be converted to solid fuel ( wood ).
form_title= Gas Fireplaces form_header= Install a gas fireplace in your home. What are the dimensions of the fireplace?*= _ [50] Do you want to install a mantle?*= () Yes () No Where are you installing the fireplace?*= _ [50]
A gel fireplace insert can provide the ambiance of a real fire without the need for a chimney or gas line. It is easy to install, eco-friendly, and can be placed in various locations within your home. Additionally, gel fuel is clean-burning and produces no smoke or odor.
It is indeed difficult to install a ventless gas fireplace. Anytime you deal with gas you should call a professional.
First off you need to turn off the gas and cap the gas line. Next, remove the gas line and the vent pipes up in the chimney. After that, remove the insert or gas log and install damper doors. Then, put on a suitable door to the fireplace. Finally, put a basket in the fireplace to hold the wood.http://wiki.answers.com/How_do_you_convert_a_gas_fireplace_into_a_wood_burning_fireplace#ixzz17W5OFp8M
No, a pellet stove insert cannot be used in a gas fireplace. They are designed for different types of fuel and operate differently. It is important to only use the appropriate type of insert for your fireplace.
To replace a fireplace insert in your home, first, remove the old insert by disconnecting it from the gas or electric supply. Next, carefully remove the surrounding trim and panels. Then, install the new insert by following the manufacturer's instructions and connecting it to the gas or electric supply. Finally, replace the trim and panels to complete the installation. It is recommended to consult a professional if you are unsure or uncomfortable with the process.
No, it is not recommended to install a thermostat on a gas fireplace as it could interfere with the proper operation and safety features of the fireplace. Gas fireplaces are designed to be operated manually and should not be equipped with a thermostat. It is best to follow the manufacturer's guidelines for operating the fireplace.
To turn on a gas fireplace using the wall key, insert the key into the keyhole on the wall near the fireplace. Turn the key clockwise to open the gas valve and allow gas to flow to the fireplace. Then, use the fireplace's ignition switch or button to ignite the gas and start the fire.
To turn on a gas fireplace using a key, locate the gas valve on the fireplace and insert the key into the valve. Turn the key clockwise to open the gas flow. Then, use the fireplace's ignition switch or a long lighter to ignite the gas. Adjust the flame as needed for desired heat.
To light a gas fireplace using a key, first locate the gas valve key near the fireplace. Insert the key into the gas valve and turn it to the "on" position. Then, use a long lighter or match to ignite the gas at the burner. Be sure to follow the manufacturer's instructions and safety guidelines when lighting the gas fireplace.